[electrofix]

yes thats fooled a lot of engineers lol

Dave

[electrofix]

problem for us as engineers is we assume the supply frequency is correct. would not have thought of that one
unless
it was on a ship , have had machines cause problems on a 60 Hz supply on some ships. As soon as we bring them ashore they are fine

Dave

[electrofix]

its easier to show a pic

that one rated at 12k at 20 degrees as opposed to the one on the heater which is 19.5K at 20 degrees

Dave

[electrofix]

ok look inside the dryer at the back at the back wall and look for a head of a pop rivet in the circumference

thats inside the drum where you put the clothes

or post a very clear picture so i can see

also look around the dryer and see if you can see a sticker with a green spot on it and let me know if its there

Dave

[electrofix]

ok first off

this is one of the dryers caught in a fire recall by hotpoint

was you dryer visited by an engineer and modified ?

Dave

[electrofix]

from what i can see you have a mechanical timer so that is on the list of fails

whats the full model and serial no ?

Dave

[electrofix]

agree but with more cost concious customers quality starts to fall

old bosch dishwashers often saw over 10 years

whats the full Enr and FD number of your machine ?

Dave

[electrofix]

ok aswo have stock £2.78

you have to use all the numbers to get correct machine

first put in model and look at the other numbers listed and you have to modify serial to suit. in this case first half of number changed to

10727224
by missing off the 00 and adding 10

the second half of the number becomes

5701023050

after adding 57 on the beginning

you should then get all service manuals and parts this for this model

Dave

[electrofix]

are you certain of model
can find TDC7100S which is built by vestel

if it is vestel should have a long serial no

Dave

[electrofix]

the only way you can be certain of the differences is to measure each one at the same temp

the 2 ntc’s in this machine have different resistance’s at 20 degrees

Dave

[electrofix]

on the lablel where the model no is , find and post FD number

Dave

[electrofix]

there must be a blockage in the hose from the filter to the drum

Dave

[electrofix]

https://www.manualslib.com/manual/1264473/Samsung-Wd106uhsa-Series.html?page=40#manual

closest i can find

see page 38

Dave

[electrofix]

you need to check resistance is around 12K at 20 degrees C

Dave

[electrofix]

no not seen that one

hoover tech are not a lot of use either, may be able to find a test routine but not sure it would help on this problem

Dave

[Author]

Posts