[electrofix]

make sure you have the connections on the lock correct

if yes check the timer connection board for blown pcb tracks

Dave

[electrofix]

with most dishwasher you check for leaks first then the heater

dave

[electrofix]

ok
found about 15 variants on aswo, lots of wiring user manuals etc

cant see any mention of Demo mode

can find a child lock assume its not that is it ?

search google for vestel demo mode and see waht you can find
or find the long serial no and find correct variant on aswo and look at manuals

Dave

[electrofix]

cant even get a hit on that model no on google

are you sure its correct ?

Dave

[electrofix]

have sent the tech

there also seems to have been a board and heater change so you need to check you have the correct board

Dave

[electrofix]

i would say you need to replace the hinges bad new is they are £34 each from Bosch

Dave

[electrofix]

probably as I don’t know which one you have but most of them are at the rear

Dave

[electrofix]

does sound like either an airflow or a refrigeration problem

check the circulation fam

Dave

[electrofix]

you could post the complete Enr number so we could look it up

Dave

[electrofix]

ok what type of dryer is it
normal or heat pump ?

Dave

[electrofix]

does depend on what type of dryer it is

are all filters and condensors clean so air can flow properly round the dryer

Dave

[electrofix]

ok sorted

check email

Dave

[electrofix]

no prob let me have your email

Dave

[electrofix]

because yours is a heat pump dryer you cant remove the condensor unit as it is piped into the refrigeration system

Dave

[electrofix]

thats a better option as you dont have to do the labour and its guarenteed

the problem is always will anything else fail and thats a hard question

repair machine and get a guarentee on parts fitted or a new machine and its all guarenteed

Dave

[Author]

Posts