Forum Replies Created
-
Posts
-
you will probably find there has to be wet clothes in there and its hot to activate valve
all about water and energy saving these days
hoover tech is really sparce. can get you a test routine if you want to try that
Dave
as i dont know these units the drain holes are situated below where water will form
that hole looks blocked is it ice if yes try a few grains of salt to melt it
Dave
as clong as its under 2M size just upload and post
if its bigger host somewhere else and post a public link
Dave
funkyboogy wrote:chaps customer door – customer answers and says i hope you don’t mind cats, I’m like no I don’t mind them
2 steps in the smell hit me like a ton of bricks, cat litter boxes all over the house – full of cats poo/pee
the guy is about 30 years old and more than able to deal with the litter, but 1 look around the house gave me my answer
anyway, the oven needed an element quick fix – thank eff for that
so getting to the things they say —– when I was testing the oven he pipes up —ohh is that the new element I’m smelling —- Im like WTF
i felt like answering i can’t smell anything as my senses have been mugged by your cats pee , but being the professional i am? –
i said ohh yes that’s what the smell isBeen in a few houses like that. went in one where the dogs pee on the floor and the small of ammonia was over powering. luckily as you said the job was quick. While I was there he was complaining that a boiler engineer had not done a good job because the boiler was leaking. I kept quiet as i knew the engineer had probably rushed the job to escape the smell
Dave
when i try to clear blocked drain holes I use a long cable tie
its soft and plastic so it does not damage the tube
dave
unfortunately frides is not my area of expertise
there must be a valve of sorts and this is leaking
have looked at the tech but it does not show me clearly how it works
it does show me ho it comes off and will post that below
Dave
you could try here , see if there is a spares section
looks like part you are after is C00294848 but double check yourself
got that from here
https://www.hotpoint.co.uk/spare-par…eu-61002090000
Dave
looks like vestel
manuals are on ASWO but you will need long serial nolooks like its the heater NTC
Dave
dunston wrote:Indesit dishwasher DIE2B19UK starts to fill then aborts program and drains.
Lights 1 and 3 flashes. Is this fault F05? jammed pressure switch?
correct
Dave
well cant do any harm to check
https://shop.ukwhitegoods.co.uk/12ml09-miele-washing-machine-carbon-brushes
this is a copy set, they tend to be ok but i often find i have to reuse the rubber mounts
brushes have to be fitted locked into the holders and released after they are installed. on the motor
a little tricky but can be done
Dave
well reading between the lines you have to move the cavity to get access ie big strip down
Beko make it sound so simple
Dave
Bet thats the quickest £50 you ever made
Had that a few times, they think you can keep it all lol
Dave
