Forum Replies Created
-
AuthorPosts
-
August 5, 2023 at 11:57 am in reply to: Neff W5320X0GB Will not spin in the spin and rinse cycle #487755
electrofix
Moderatordoes the drum turn at anytime ?
I would check brushes first
Dave
electrofix
Moderatorelectrofix
Moderatorcant be 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} but like you i got same part no
if you have old belt you can check length and see if it matches
Dave
electrofix
Moderatorgot to be something in the way its been used to cause that
Dave
electrofix
Moderatorthe problem here is one of liability
if its your machine no problems but if you fit a safety stat to a customers machine and the machine goes on fire then you may be in trouble as its not an approved part
its not your fault the manufacturer does not fit a resettable stat or supply the part just price for a new heaterDave
electrofix
Moderatorwell p3 is the eco progamme. all newer dishwasher should default to this programme on switch on
can you start a programme or change it ?
Dave
electrofix
Moderatormost appliances contain chinese components
you dishwasher is made by a turkish manufacturer called Vestel
Dave
electrofix
Moderatorkwatt wrote:Yup, often fitting them and then try to send them back as well.
Well seeing half the population is of below-average intelligence.
K.
only half ?
Dave
electrofix
Moderatorok now i have the correct machine
your has got a flow meter that measures water coming in
check wiring to this ( have had mice eat the cables)
if wiring ok it should be either this part or the board
cant promise i am right as you can imagine but changed lots of flow meters
Dave
https://shop.ukwhitegoods.co.uk/42153776-dishwasher-air-break-flow-meter
electrofix
Moderatorthey do it all the time, blindly buying components in the hope it fixes it
Dave
electrofix
Moderatorgoogle wont but that serial narrows it down to one machine
cant read it from the pic
Dave
electrofix
Moderatorhoover have normally never supplier thermostats but someone on here a while ago said they had started to sopply TOC but cant find the part number he quoted
there are also 2 heater part numbers on this model and is serial no dependant
Dave
electrofix
Moderatormikedmc16 wrote:
Ok. So if water flow and not blocked, best to simply change the switch. If that doesn’t work it’s the board and time to simply get a new dishwasher.
ver likely
the pressure is fed to the swich via an air chamber, make sure thats not blocked
if you get me the long serial number will try to find correct switch
Dave
electrofix
Moderatorno easy way. with the later switches you can destroy them if you blow into it so the only way is to swop them out
your lucky in one respect as this unit is a known manufacturer , most Bush stuff is chinese junk with little access to spares or information
Daveelectrofix
Moderatorsomewhere there is a pressure switch
this senses water level. its either blocked up ( dont blow into switch directly)
or there is no water going in to sense
check for water flow, check switch and make sure its not blocked. check wiring from switch to board
or the board is faultyDave
-
AuthorPosts
