[electrofix]

does sound like a board problem

open the board and look for blown caps

Dave

[electrofix]

seems to be a known type of problem

check your email

Dave

[electrofix]

sorted
check email

Dave

[electrofix]

to save time

created a pdf and emailed it

does not seem to show a drum but see what you think

but does seem to show a welded cluster with part no 405 53 99-11 / 9

Dave

[electrofix]

for future ref
to post pics, host on another site and post a public link

Dave

[electrofix]

bit confusing

get 2 numbers (see item 5210 and 5213 in pic )
for the board. am thinking the one marked basic may be unprogrammed as the site stocks the other one

https://shop.ukwhitegoods.co.uk/4810…control-module

I would request the site double checks not only if its correct for you but also if its progammed

Dave

[electrofix]

have you checked for mains input when it goes off as it sounds like a bad supply

Dave

[electrofix]

8511570 ????

is there more of this number the above only narrows it down to 60 machines but adding model get it down to 8

Dave

[electrofix]

A bit confusing

you say it works on a quick wash, that to me means it runs the whole programme with no problems

you then say it does a time jump when it gets to 15 min. Is that on the short programme or one of the others ??

you then say “when gets to about 15 mins jumps back to 20 mins and stops
Heats drains washes, any pointers?

am assuming you mean

when gets to about 15 mins jumps back to 20 mins and stops. Machine fills, heats and drains so does not seem to have an issue there

Dave

[electrofix]

fault codes as below

just to add clarity between Er1 and 7

Er7 looks for pulses from the flow meter when water is not being asked for so is looking for stuck or leaking valves

Dave

[electrofix]

ok a little confused !!

the fan oven is working and it does cut off after 5 mins ?

meaning what .
you set it for 5 mins and it runs ok
or
you start the programme and it cuts out 5 mins in

sort of same with movrowave are you saying it runs for 2 mins and 10 secs then cuts out
or you set it for 2 min 10 sec ( odd time) and it runs ok but after the prog ends it cust out ??

Dave

[electrofix]

look in the user settings and see how its set

Dave

[electrofix]

ok thats likely to shake things up

Dave

[electrofix]

if you click forward on the links you get to an account supended page

could be fake now will have to wait and see

Dave

[electrofix]

its down to the fact the machine went out of manufacture 22 years ago. its only because there were millions of these machines around that some spares are still available

Dave

[Author]

Posts