[electrofix]

ah see now you can read it 2 ways lol

could be a concrete weight loose,
feet may not be adjusted properly

or just some random part hitting the case

had things like this. the bad engineers refuse to come back so he sounds ok

Dave

[electrofix]

well if its new it should be under warranty

also did he remove transit bolts. you can tell be seeing if the drum moves easily forward and back at the top

Dave

[electrofix]

Samsung manuals are hard to get

https://www.manualslib.com/manual/2052089/Samsung-Dv90t-Series.html#product-DV80T{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}20Series

there are a few on manuals lib. not same model but at least its a heat pump unit

try a timed programme if its got one as there can sometimes ignor sensors

Dave

[electrofix]

sounds a bit like 2 faults

fault one touch plate problem
fault 2 terminates after 10

did customer see any fault codes ?

when it terminates is it dead or can you reprogramme at once ?

Dave

[electrofix]

well from your 2 pics it looks like the rubber on the new one is a lot thicker

the profile shape is similar so look how the old one fitted as a clue

Dave

[electrofix]

well might well fit but uncrimping and recrimping the base might be difficult

but considering the price of the new inner door you have not got a lot to lose

Dave

[electrofix]

dont know if its correct
do know the seal is fitted and then its crimped every 30mm or so. all those crimps have to be opened before you can fit it and then crimped closed again

when i look up your unit on the public hotpoint spares site it comes with the inner door as £122 but not shown separately

https://www.hotpoint.co.uk/dishwasher-inner-door-panel-j00229405/p

Dave

[electrofix]

well there is a cooling fan down there for the compressor that maybe hitting something

pt no 140068853013

Dave

[electrofix]

take the lid off and see if the noise is at the top or the bottom of the machine

dave

[electrofix]

upload the pic to another site like google pics

then post a public link so we can see it

Dave

[electrofix]

would need to see a good picture of the brush that’s fitted to be certain but a lot of them use

C000196539

Dave

[electrofix]

its difficult to tell but my first check would be the fan assembly not the compressor.

the fan blows the air around the system while its drying and something may have disturbed it during the move

did you put the transit bolts back in during the move ?

Dave

[electrofix]

suedehead1 wrote:I ordered the pcb for the machine and when i fitted it it lit up but it kept saying the door wasnt locked old style door lock, I fitted a solenoid door lock
and it worked. pcb was wrong one for that machine seemed to be 2 different versions.

Beko often change boards by serial no so it may have been for same model but the may have changed board and lock on a later machine

can see that happening and I have looked up Beko parts that change number if add serial no

Dave

[electrofix]

probably delicate fabric cycles which run on lower heat

if you post the model and serial no we can look it up

Dave

[electrofix]

think grill support is part no 602129300

but check it will fit yours. you will also need the spire clips to clip in the holes and self tappers

Dave

[Author]

Posts