Forum Replies Created
-
Posts
-
the pressure switch works with air not water so there is a chamber like an upturned cup that traps water and turns it into air pressure for the switch to operate. these can get gunked up and stop the switch operating
its actually moulded into the sump. i get a cable tie and being flexible you can work it around and see what comes out. i do it with a small amount of water in so it washes the rubbish out
Dave
remove the lid and the right hand side panel
there is a steel box at the top right hand side. screws to open it are accessible once panel is removed
you will have to use gen Beko capacitor as most of the non gen ones are too short and the leads are not long enough
Dave
can find hits on sales sites selling the machine but no spares suppliers
from what i can see its the same machine sold under the Electriq brand
door looks the same to me
dont know where this machine is sourced but you can say almost 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} its a cheap chinese pile of junk with poor backup
how old is it ?
Dave
like you cannot find a thing on it
search for the above number give zero results
are you sure above no is correct as most of the time I only see 4 digits after 44444
has it got a model no as well ?
Dave
according to owners manual error 4 is temp sensor i would check that
have you tried putting a load across the element terminals
what i am thinking is you have to disconnect element to stop tripping but maybe computer is looking for a circuit
Dave
well cant be 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}
this is from another modelDave
normally its press start button and one of the buttons next to it and turn on
have sent you some info
Dave
serial no needs to come off the cooker
often if the is a lower storage compartment its hidden in there
first 4 digits of serial are the model no used to search for parts etc
Dave
on that video they are all cutting in and out randomly
does look like the ring thermal cutouts are activating
have you looked in the owners manual as would need serial no to look it up
Dave
looks like hinges and springs are complete units
look up part no
50247626000
take the kick strip off and the door outer and see how things look from there
Dave
my worry is what has cause this
follow the current path to the next board in line and look for more damage there
dont think there are many parts available for these now, if at all
but we can ask a few people once we know the extent of the damage
Dave
