Forum Replies Created
-
Posts
-
Re: Missed This One
Anyone else see this today:
Re: Top pseudonym!
it took me a while to figure out rudolph hucker yet i got alf uckem straight away.
Re: anyone for tenious?
Best I can do is film director Ken Russell & Tony Blackburn’s mum – she always made a point of telling us who she was. One of my former workmates once went to Kevin Keegan, refused his offer of an autograph & then billed him because the fault wasnt covered under guarantee.
Re: Missed This One
Another customer that didnt get their free flight ?
All they have to do now is find 120 people who want to buy a Hoover.
Re: zanussi front panels
You might find that the main board is the problem – it has little sprung plastic bits which the selector buttons press against and these can snap. If it’s just a cosmetic issue then i would just put up with it.
Re: Condenser Dryer purchase help
actually i wanted the animated beaker from the muppet show avatar but the file was too big so i settled for the mad cow instead – and what happened to “goatboy is here to please you”?
Re: Tricity Bendix D/W DH102
Could be pressure switch contact jammed not seen it on these ones myself more likely the iwms (the big side tank) is getting sludged up or the plastic tube from the iwms to the sump (bottom front) usually get a stale musty smell inside if the bottom hose is blocking up.
Re: Condenser Dryer purchase help
Might be worth looking at the Tricity Bendix condenser dryers as theyre made by Zanussi – pretty reliable and solid, should also be cheaper than the Zanussi version. Personally wouldnt touch the white knight.
Re: Whats the most annoying thing customers do?
Meant to post this earlier, proper friday afternoon job:
Another engineer ordered a compressor for a bloody great siemens f/f as hes not equipped to change it muggins had to go on a 2 hour round trip.
Got to the job, sure enough the old compressor was seized so changed it, regassed & tested it. Must have spent 1 1/2 hours on me knees but it was working fine, did the paperwork then gave the customer a shout to tell her i was done. She came into the room and said “Oh, while youre here…. I meant to say to your last bloke…. theres a crack along the back of the liner just below the back of the shelf, its been icing up around there as well…. anything serious ?”Customers – cant beat ’em….. shame sometimes.
Re: Electrolux Aqualux 1200 Washer/Dryer
Sounds like you may need a new ventilator (dryer fan)
Theres 2 types so you need to find the serial & product number (PNC)Re: zanussi oven
Not on an FM56 – seal is tucked in between outer frame & oven cavity so doors have to come off to get to all the screws
Re: ZANUSSI DRUM SEAL
When you tightened the bolts did they ALL go tight or are some just turning – if so you may need a new rear half, either way it’s a pig of a job because the whole tub assembly has to come out and it gets even more fiddley on a washer dryer. Might be better off getting an engineer for this one, see Repairs@.
