[Galway]

Re: electrolux w/m EWN14991W (914527706)

that was quick
thanks martin i will try the wire

[Galway]

Re: Beko WMA510W

ntc on element?

[Galway]

Re: HOOVER T/D (TV 30 001)

thanks guys
sorry for using caps i didnt notice

[Galway]

Re: hotpoint bfi620 d/w

hi guys
still trying to figure this one out .drawer wont sit in properly.
any ideas?
thanks

[Galway]

Re: simpson 36S551 washing m/c top loader

thanks i will see if customer wants to go ahead and order parts.
thanks again

[Galway]

Re: simpson 36S551 washing m/c top loader

yes its australian and there site says they are part of the electrolux group.
but i dont see anything about them over this side of the world.?

[Galway]

Re: candy d/w CFD 612-80

thanks will have another look

[Galway]

Re: candy d/w CFD 612-80

anyone any ideas?
thanks

[Galway]

Re: zanussi IZ12

thanks i will have another look

[Galway]

Re: Beko WMA10W wont pick up into full spin

i think i had a similar problem but it was the customer using the fast wash with to big a load and it would not spin.

[Galway]

Re: Beko WMA510 – Lights Flashing

try resetting if no good then check element and ntc connections door lock if no good probably the pcb.have had aq few of these but usually resetting sorts it.

[Galway]

Re: bosch was28466gb/01

i had one of about a year ago and i did a lot of head scratchinng but eventually found two coins stuck in the part where the hoses join at the top of machine .i dont know how they got up that far.

[Galway]

Re: Beko dcrs 68 w ( i think)

could be looking a a board problem.
i know there is a test program for this but i cant put my hands on it .i sure someone will have it and help you out.

[Galway]

Re: Beko dcrs 68 w ( i think)

open door and take out the sensor at the 6 o clock position and clean .these sometimes get blocked up with fluff.

[Galway]

Re: sgs45c02gb/02 bosch d/w

dont know yet but dont want to get that far and then have to go back with the puller
thanks

[Author]

Posts