Galway

Forum Replies Created

Viewing 15 posts - 106 through 120 (of 245 total)
1 2 3 … 7 8 9 … 15 16 17
  • Author
    Posts
  • January 28, 2010 at 3:56 pm in reply to: creda t/d 37648 #310323
    Galway
    Participant

    Re: creda t/d 37648

    the higher temp should be the one shot
    and the lower the self resetting

    January 27, 2010 at 8:20 pm in reply to: beko drcs68w #310361
    Galway
    Participant

    Re: beko drcs68w

    try running the test program from page 7 on known error codes and if everything works then its got to be the control board

    January 27, 2010 at 8:07 pm in reply to: creda t/d 37648 #310321
    Galway
    Participant

    Re: creda t/d 37648

    thanks For the reply but neither of them has a colour spot but they have got the temp on them .

    December 22, 2009 at 6:17 pm in reply to: Whirpool adg6340 flashing #307040
    Galway
    Participant

    Re: Whirpool adg6340 flashing

    maybe water level switch gunged up and switching in and out. 😕

    December 21, 2009 at 9:02 pm in reply to: Electrolux Washer EWN 14991 W (91452770601) #306895
    Galway
    Participant

    Re: Electrolux Washer EWN 14991 W (91452770601)

    no earth leakage problem on the element or motor any other ideas?
    thanks

    December 19, 2009 at 8:17 pm in reply to: Electrolux Washer EWN 14991 W (91452770601) #306894
    Galway
    Participant

    Re: Electrolux Washer EWN 14991 W (91452770601)

    thanks Bob
    i will check that.you obviously have come across this before.
    thanks Niall

    November 12, 2009 at 8:12 pm in reply to: Door seal retaining spring pliers #300841
    Galway
    Participant

    Re: Door seal retaining spring pliers

    a plastic spring clamp on top to hold spring on and you still have 2 hands free.in and out in 15 min max.

    November 11, 2009 at 5:38 pm in reply to: Beko WMA10 – Am I missing something??? #303186
    Galway
    Participant

    Re: Beko WMA10 – Am I missing something???

    probably the door gasket .there is a replacement seal for these as the drum was rubbing against it,on the wma510,i guess it could be the same problem. check if there is a groove worn on the seal.hope this helps

    November 6, 2009 at 8:34 pm in reply to: whirlpool f/f s20drbb32-a/g (858615815000) #302501
    Galway
    Participant

    Re: whirlpool f/f s20drbb32-a/g (858615815000)

    thanls pcb on order. 😀

    November 4, 2009 at 12:51 am in reply to: whirlpool f/f s20drbb32-a/g (858615815000) #302499
    Galway
    Participant

    Re: whirlpool f/f s20drbb32-a/g (858615815000)

    thanks any idea of part no and price?
    thank you

    October 27, 2009 at 10:14 pm in reply to: Beko AWM510 No start #300626
    Galway
    Participant

    Re: Beko AWM510 No start

    more than likley 🙂

    October 13, 2009 at 2:08 pm in reply to: hotpoint bd32 #298475
    Galway
    Participant

    Re: hotpoint bd32

    ordered the rathberger stat but when i went to fit it it was a diamond h but the rathberger fits no problem.is this ok or is there a reason why it has to be the diamond h.
    thanks

    October 9, 2009 at 7:06 am in reply to: Hotpoint DWM75A dishwasher AL10. #298310
    Galway
    Participant

    Re: Hotpoint DWM75A dishwasher AL10.

    check to see if the spray arms are rotating properly.
    if you do a search for AL10 it might help as well.Good luck

    October 3, 2009 at 7:41 pm in reply to: hotpoint bd32 #298474
    Galway
    Participant

    Re: hotpoint bd32

    thanks i will chance that then and see.

    October 2, 2009 at 9:42 pm in reply to: hotpoint bd32 #298472
    Galway
    Participant

    Re: hotpoint bd32

    thanks Jim for that .on top cover this was written with marker 09/05 78327
    dont know if that has anything to do with date code.
    thanks

  • Author
    Posts
Viewing 15 posts - 106 through 120 (of 245 total)
1 2 3 … 7 8 9 … 15 16 17