Forum Replies Created
-
AuthorPosts
-
Galway
ParticipantRe: hotpoint bd32
thanks Jim ,but the sticker with model info has worn away as usual,its a cream colour so i am guessing its bd32n?
what do you think
thanksGalway
ParticipantRe: Amica
have replaced 2 thermostats on amica f/f as fridge was freezing and stat could not be adjusted ,but even a new stat does not cure the problem.all i can think is the stat is in the wrong place or it is badly insulated. 😡
Galway
ParticipantRe: beko dishwasher
if its not the heater then i think its the pcb
Galway
ParticipantRe: Beko WMA510 wash led lights on spin
possibly stuck on a cycle and customer forgot to cancel.i have come across this a couple of times with this model.
Galway
ParticipantRe: Neff oven B1430N0GB/02 FD88002
thanks Don
Galway
ParticipantRe: BEKO WM520S
have had similar call outs and probably the pcb but on more than one occasion it has been stuck in the previous cycle and just needed to be cancelled by keeping the start button pressed even though the customers have said they tried this already.
hope this helps.Galway
ParticipantRe: hotpoint WD420P(37143634)
ni checked all connections all ok .i have now ordered replacement board.
so fingers crossed.
thanksGalway
ParticipantRe: tricity fd845s 925590520-01 (fridge/freezer)
sorry on second thoughts maybe it is right. 😳
Galway
ParticipantRe: hotpoint oven BD42ss
thanks will investigate further
Galway
ParticipantRe: hotpoint oven BD42ss
11 1 00736 or maybe 11 1 00738 customer thinks but not sure ? any ideas
thanksGalway
ParticipantRe: DeDietrich dishwasher DVF300 fully integrated
dont see to many DeDietrich m/c but i saw one last year and it had a tech leaflet tucted away behind the plinth under the door beside module.but dont know if they all have them. 😉
Galway
ParticipantRe: Washing machine not spinning
drum bearings?
Galway
ParticipantRe: hotpoint FF72P fault code
i cant say ive seen this unit but EA means no feed back from baffle which is what allows the cool airflow to fridge .so investigate this first but unplug first.
Galway
ParticipantRe: Beko Tumble Dryer DRCS68W
heater would be my first choice only half of it working?
Galway
ParticipantRe: Diplomat dishwasher 6 flashes.
i have changed the reed switch on these a lot cheaper than full matrix .have also come across bad connection on main pcb! 💡
-
AuthorPosts
