Forum Replies Created
-
Posts
-
Re: ukwg olympics
kwatt wrote:The engineer claimed that the weight on an ISE10 was bent, after a year and a half of use.
maybe he wasnt meaning “bent” in a bendy sense ??? 😯
Re: Hotpoint WF00G – for spares
hmm “our” old washing machine had bearing failure that was a wf000p and i think its still hiding somewhere… might stick the motor on ebay, privately, of course 🙂
Re: lg wm-13150fb smoking
his mrs couldnt be without a machine for more than 48 hrs so bought another lg off me, so im gonna play with this in my spare time as a learning excercise >:)
Re: bosch shv55m03gb/56 is playing up.
leavemetogetonwithit wrote:That pressure chamber has two three tag switches on it. It’s quite easy to push the connector on the wrong two tags of one of them IIRC. Or the microswitch could be duff?
yeah when you reminded me that the p/chamber controlled water fill, i remembered ive got a s/h bosch thats prolly got a decent p/c so will try that out tomorrow,
leavemetogetonwithit wrote:
Heater you could test separately on a flying lead to make sure it’s got no issues. Usually the relay joints / contacts just burn out because they’re at their rated limit (10A).How do you mean test separately on a flying lead ? its late and im still hurting from humping 2x ld w/d up 6 flights of steps for top floor letted properties today
Re: oven overheating
dont forget she might also have been missold the oven, just cos its got a fan in it, doesnt mean its a true fan oven, if its fan assisted most brands recommend only middle 3 shelves are used simultaneously as temps cannot be as easily controlled on top and bottom positions, and then it also affects the middle shelves too.
whats the make and model ?
Re: bosch wvd24520gb
but surely unlikely if its a new valve though?? put it on a rinse only and see how much it fills the tub, its very easy to get the hoses mixed up with the triple coils, unless im just stupid 🙂
Re: bosch shv55m03gb/56 is playing up.
im with you on that, its my gut instict too, but thing is, i cant be sure the burn out is defo where the heater joints are, and customer so far hasnt even implied it wasnt heating either, but saying that, she is pretty blonde and i think her patience is wearing thin (“omg weve been without a dw for over a week now”) oh how terrible, silly thing is she has a house keeper who feeds the kiddywinks and does the washing up. is the new board likely to pop if i dont sort a heating fault out???
Re: CDA intergrated washer dryer
why will it probably be a siltal? plus your assuming its a timer programmer. yet majority of the cda washer dryers are fully electronic as they are only a young brand…
im not saying your wrong but if O.P. followed forum guidelines about providing more specific info such as a model no, the chance is they would have recieved more responses by the regulars by now.
Re: bosch shv55m03gb/56 is playing up.
im assuming its all done with the heat exchanger/pressure chamber assembly (482936) theres a turbidity senser that was sludgey in the element/diverter unit, but cleaned that out and looked ok? no jug impellor on this, the only other ir senser is on the salt tub, and cant see that affecting this. p/chamber has been completely cleared of limescale and not very sludgey. the rest im assuming is controlled by the pcb???
Re: Indesit WIDXE146 Washer Dryer F-13 Fault
first port of call is the dryer element. seem to be going on an annual basis these days. plug out first, obviously
