Forum Replies Created
-
Posts
-
Re: Hotpoint DWF32 not cleanng properly – Help
dont get carried away cja at 8 yrs old, the motor seal will prolly need replacing as well as the impeller if heavily used with rinseaid, but still id rather spend £150 on a dwf32 than £200 on a cruddy chinese made thing…. id even spend £150 on it even tho argos have a beko for £250…
Re: Indesit FM23KIX electric oven – lower element arcing
markengland wrote:which is definitely the cause of the arcing – it is really distorted in the middle and is making contact with the element so if I replaced only the element the problem would quickly reappear.
really unlikely, the only reason the element could arc to the tray was if the element had split thru the insulation and outer casing, even so, replacing the element should fix it, itd be unlikely to short out if the new elements casing was touching the tray, until the insulation failed again.
the tray is probably only warped due to heat, on this machine, besides i thought the lower element is below the main cavity anyway????
anyway you know best, clearly.
Re: Indesit IDC 75 Condenser Dryer Blowing House Fuse
moulded plug #1
element #2
water in base/spraying on element/motor #3
pump #4
pcb #5Re: S’now joke
trek 810 singletrack with conti explorers. best tyres ever in snow!
the rucksack carrys everything i need for “assessment purposes” unless initial phonecall indicates oven element/drain pump/ etc basic first time fixes, in which case its often squidged in or hung off handlebars
Re: Indesit FM23KIX electric oven – lower element arcing
mark your getting into expensive territory, its probably just the element thats gone, and it shouldnt set you back more than 50 quid.
im worried how you knew the top elements heated when the bottoms didnt after you had already stripped it.
do not live test!!! :zap:
Re: zanussi zkc 5030w live going to neutral ?
cant remember for this model to be honest, but have come across plenty of dodgy wire-ups coming out of zanussi’s cooker plant…
main t/d positioned in t/o t/s hole of fascia and vice versa for starters….
Re: Hotpoint Ultima CTD85 TIMER PROBLEM
just check the the drier element, had this on a ctd80 (white version) as it stuck on 20 mins and tripped few mins afterwards. replaced pump, but still stuck on 20, *no trips* so assumed to be pcbs so referred to hp, hp came out and replaced element & stats. just seems to have come out of normal insulation parameters i guess…
Re: Hotpoint DWF32 not cleanng properly – Help
meggiedude wrote:.
Only reason I ask is that its sale time now with deals at Curry’s etc.
I am not afraid of getting the tool kit to this beast, but don’t want to throw good money after bad.its a known sale time. they wont be selling anything ACTUALLY worth buying.
Re: W/M noise after pump drains
gotta be honest, sounds normal for a beko, and most other front mounted drain pump washers…
really need an audio or vid clip, incase theres anything serious ???
Re: Bush WQP12-9348 Any Good?????
the indeshit will probably last longer… you at least get the 5 years part cover with their crud
Re: comet
sainsburys has been down all day. wanted to check on a tv i was interested on for the xbox
Re: S’now joke
Martin wrote:
gandh1 wrote:
have found cycling to couple of the jobs with steep long drives (but too far to go whole way on foot) be a barrel of fun, except when the cables froze so no brakes :sGod Lord!….another cyclist in our midst. 😯
only when necessary…
Re: CDA CW 497 dishwasher – error code 11
be aware if the appliance is failing and its not an external leakage, then it will happen again within 1-6 weeks of draining, depending on speed of leakage. you can usually assume your safe after 8 weeks 🙂
Re: HMRC Latest brain wave
Martin wrote:You have little or nothing to fear if you fill in your Self Assessment Form in correctly and pay your tax demand in full and on time. Just play it their way and no-ones gonna come knockin’ on your door. 😉
tell that to the person hung out to dry for paying more than they should have done to hmrc, who took legal action for falsifying figures, and the ensuing cost of legal representation was the cause of his businesses collapse
it was in the mail this year just before the election
