Forum Replies Created
-
Posts
-
Re: Whirlpool ADP4501/5
Hi
Have tried this even to the extent that I have had the pressure switch removed and cleaned. while out check operation including microswitch
Geoff
Re: bio diesel
Hi
we are paying £146.00 per litre for desiel this week and am looking at buying direct from fuel supplier . We already do this for the red desiel and store it in an oil central heating tank. (for use with tractor only not van or car I hasen to add). This would save me about 10p per litre.
It means though I would have to buy a 1000ltrs at a time but in the grand scheme of things this would save about £500 per year
Geoff
Re: Electrolux ESL6115
Hi Mike
Sorry but I do not realy know. Was back at it Yesterday and all I can get it to do is the pump to run for 2 min pause and start again. As the water in the base was clean I can only assume that the either over filled or there is a leak on fill. There is no detection in base for water leak which amazed me for an AEG. Also I have found out from them that during the week prior to this that they had a problem with the power in the area.
Have quoted for a module for now as something is wrong with it as it will not let me get into the service mode but warned then that this may not be all. They are considering their options.
Many thanks for your help and interest Mike and will let you know if I get the chance to repair the unit what I foundGeoff
Re: Electrolux ESL6115
Hi Mike
No this one only runs with the door closed. Doesnt even bring up a fault code and nothing in the service mode.
I am having to face up to the prospect of it being the module but not totally convincedGeoff
Re: Hotpoint WML540
Shows how back yesteday was I failed to check the NTC
Thank you Matin – will be back on Monday to check
Geoff
Re: Merry Christmas
I too would like to add my thanks to those who support and operate UK Whitegoods wishing you all a Merry Christmas and properous New Year.
Now to go and pack as I will be starting my long journey tonight back to Wales for Xmas.
Have a good time
Geoff
Re: Belling or Beko Thermal fuse Belling BE335WH
The inline thermal fuse has been replace by a round thermal cut out on some cookers.
Depending on model they sometimes need a kit which includes wiring and round thermal cut out.
The replacement fits on the right hand side of chassis not on the oven back with the bracket pointing downwards. (screw at top)
If you let me have your email addrees I will send you some stuff
Geoff
Re: Neff T1872NO/01 fd8402
Just to update this one.
problem was with the PCB As it would work for upto 10 mins then some of the rings would stop working and not come back on plus one ring would not work at all.
The supply to the house was only 220v and dropped as appliances where being used ( with hob and oven on dropped to 208v into house). Makes me wonder if this have anything to do with the failure of the module 😕
Geoff
