[Goatboy]

Re: Miele CTD

PGS wrote:Remember to test it with laundry in.

Aye, have done.

It goes backwards and forwards for a minute weighting the load, then you hear a relay click on the little heater pcb, but there’s no neutral going to the heaters. TOC tests fine 😕

After a few minutes it beeps and flashes the ‘machine iron’ light, which I think is the 3rd light down.

[Goatboy]

Re: Crystal encrusted vacuum

:eeek:

They could of blinged up a more reliable make 😕

[Goatboy]

Re: whirlpool dwf 415

ironstone wrote:P.S. Do they really make the cabinets out of recycled razor blades – I’m running out of plasters?

Sucks, don’t it 😕

6/7 flashes is a water filling problem. I guess it’s the white plastic thing that’s faulty, though it could be the black diaphramy thing, or the PCB.

Unplug first please :zap: And don’t live test!

[Goatboy]

Re: Bosch SHV43a – repair or replace?

Jesus wept, this thread is still going! 😯

Try a new capacitor on the wash-motor. After all the hassle you’ve been through already, you might as well risk a fiver/tenner on a new capacitor.

:snig:

[Goatboy]

Re: packaging on new machines

I’d love one of those big square tea-cosies 😀

[Goatboy]

Re: Bosch SHV43a – repair or replace?

regg1e wrote:And why aren’t you guys watching the Rugby? 🙂

Rugbo?!?!?! :hmm:

Meh, I think this is a model with the diverter valve which Iadom mentioned above. This switches the feed between the top n bottom spray arm while the motor is running.

[Goatboy]

Re: Bosch SHV43a – repair or replace?

iadom wrote:…the diverter valve may be faulty. 😥

I thought this model would be too old to have one?

Ps. Matrix sounds cooler. Like Anti-syphon device sounder cooler than U-shaped bit o’ plastic 😉

[Goatboy]

Re: TECHNIC DW2677 DISHWASHER

8 flashes is a water level fault.

You m/c might be blocked up with ****, or it might be your detergent that has turn the water to sud instead of water.

I’m in a soft water area, so I have constant problems with detergent. For soft water…

Dont use salt or salt-action tablets
Dont use cheap supermarket brands (too soapy)
Turn your rinse-aid release to the minimum
Dont use tablets at all in slimlines

Again, that is for soft water areas

If you’re venturing inside your DW, unplug it first please

:zap:

[Goatboy]

Re: Bosch SHV43a – repair or replace?

Have you cleaned the main feed pipe from the matrix* into the DW tank?

Is the heater working, and does your motor maintain a constant speed?

Ps. Obviously you know, but for other people reading this….

Unplug the machine first! :zap:

*That’s what I call it, though me bro, the BSH-guy, laughs at me for calling it that.

[Goatboy]

Re: Bosch lower spray arm not rotating

There won’t be a pattern version!

Have you check to see if it is blocked up. All the ones I’ve had have been blocked, so luckily I haven’t had to change one of these yet :snig:

[Goatboy]

Re: CI555WH noise

Mr Seed! He called us out to his ISE5 2 or 3 times complaining about a noise knocking that just happened once in a while. I could never pinpoint where this noise came from 🙁 And the noise wasn’t there all the time, it was pretty rare, but very loud when it happened.

Eventually, when the m/c was about 2 n half years old the motor snapped off the tub! Anyhoo, he’s very happy now after a complete rebuild 😀

[Goatboy]

Re: ISE10…covered by guarantee?

I’ve just fit a new door seal to one.

Hair-dressers! Drying towels all day, everyday. Customer complained that the fluff wasn’t collecting in the filter, amd then the m/c was drying very slow.

The seal wasn’t missing, it was just looking a little haggard. The fan and sensor were completely blocked.

The customer is friend, and they’re going to let me know how the new seal affects it.

Ps. The m/c was the very first ISE10 CTD

[Goatboy]

Re: New Dishwasher

rawhead wrote:If the extra £100 really makes a difference.
I’ll consider both pricepoints. £300 and £400 ……..

You just have to make sure that your not paying the extra money for style instead of quality 8)

[Goatboy]

Re: New Dishwasher

Ish! Just another 100 squid for the really good stuff ❓ (ISE, BSH etc)

It’s a pitty that you’ve been burnt by the overpriced (IMHO) Smeg stuff. For some reason they have a rep. for quality.

Just avoid Merloni stuff and Chinese stuff is my opinion if you have to buy a cheap one.

Zanussi or Whirlpool are OK, unless Don has any objections?

[Goatboy]

Re: AEG 50730 Problem

The DW probably thinks it is still full of water, and is trying to empty it before it’ll start a cycle.

I can’t remember how the pressure system works on that particular model, but it could be something to do with the matrix.

corkyballs wrote:…the water pumps out of the sump for a few seconds and then about 60 seconds later the error lights…

What is it doing during those 60 seconds?

[Author]

Posts