[helo_75]

u got mail!!!

[helo_75]

Re: LG GRA207CVBA

sorry , no, the top 2 and bottom one are different to the other 3 , just to confuse people

if you give me your email, ill send you the info so u can check for yourself

[helo_75]

the top 2 are different to the bottom 4!!

which ones are the ones you want?

Lucky Goldstar

[helo_75]

and dont go for one of them horrid ff200x things… same machine, different doors…

look at OTHER machines

you have no idea the trouble theyre causing

[helo_75]

get it exchanged and buy a proper fridge freezer while you still can

its probably short of gas…

[helo_75]

and this is one of the reasons we always recommend plug out

[helo_75]

hang in there m8

ull get there, at least your persistent, i just hope it all works out for you

[helo_75]

possibly

theyre inexpensive, and worth a try

is the motor free if you turn it by hand?

plug out, of course

[helo_75]

they dont have an rcd!!

maybe pcb?

yep, hes probably done the board in now

get him back, as quick as you can

[helo_75]

dont worry, theyre a bit better than the hotpoints, moisture isnt a problem

[helo_75]

yup

[helo_75]

ppl say not

i cut and butt them
drum out? dont go there !!

[helo_75]

its the sensor on the dryer

if you take off the top, its mounted on top of the dryer box, usually has a white plug with 2 black wires attatched

plug out if your looking

hi jim :waving:

[helo_75]

the filter is at the bottom of the drum, aqccess throught the reap panel at the bottom

1,2 &4 im sure is a dryer ntc problem, or at least a faulty dryer

[helo_75]

ok

unscrew the middle bolt

then push the threaded shaft through , then the heater should pull out

try not to dent it

when ypu put the new one in, dont forget to tighten the middle nut!

[Author]

Posts