Forum Replies Created
-
Posts
-
which part of ‘it needs a board or at least a relay’ didnt you understand?
f10 is a pressure switch fault
f8 is shown when the heater circuit is on with no water in.. it doesnt do it when you unplug the pressure switch because your disabling the heat protect circuit
THE BOARD IS PROBABLY FAULTY
thats helpful
communication error means the two pcb’s arent talking
worth checking the blue cable between the two boards for dirty / loose connections
unplug it of course
sometimes, leaving it unplugged for a couple of hours rectifies it
further to that , one or BOTH the boards could be faulty
static heater fault?
who told you that
it needs a board
or a relayread the previous threads, we’ve had this conversation hundreds of times
theres a thermal fuse.. from the neutral on the terminal block to the selector
if you take the back off, you can clearly see it, its on a metal hook, attatched to the cavitythey do normally stay off when it goes though
only protection it has, i believe
that 143056 is a dead duck now, u need the replacement, and a smart d=card, and off cours e a reader
other than undoing it, cleaning the thing thoroughly, on the filter housing, and where it sits in the pump, no
and im sure there only the pump unit itself available
but well need the production number, from the inside of the door
