Forum Replies Created
-
AuthorPosts
-
helo_75
Participantand heres me thinking rhis was an advertisement for zanussi machines
oh well
helo_75
Participantjohn lewis, trafford centre.. comet.. trafford park.. look out the window, ull see it!!
not sure where all the stores are, im on service, but u can check on the website
helo_75
Participantif thats not the case, it’ll be the defrost timer
part number 50213960003
thats the usual suspect to be fair
helo_75
Participantlol, tell us something we didnt know!
merloni have gone downhill rapidly over a number of years now, accumulating several different brands on the way
it will take time, but theyll learn
trouble is, other companies will fall because they dont have the financial weight to carry through
i wont have a merloni machine in my house, not even a free one
helo_75
Participantlol, dont talk to me about comet
i work for them
the facts? comet will beat ANY price you can quote like for like, within a certain distance from shop
people arew quick to comment, and are generally unaware of the facts
helo_75
Participantis it a direct drive or belt driven?
helo_75
Participantits a washer dryer remember
my moneys on the dreaded 8 flashes
heater relay stuck!!!
helo_75
Participantcheck the connections on the pcb first.. i had that fault and it was a loose wire on one of the connections
which one exactly i cant remember
helo_75
Participantahem….
i work for comet.. we aint useless… we do the best we can, with what the manufacturers give us to work with
a system problem would be pricey, a pcb not quite as much, depends on the engineer i suppose.
hope this helps
helo_75
Participant9 days?
unnacceptable, in most circumstances
take it back to store.. dismiss the goods out of hand, and get a refund
go to comet and buy a bosch
helo_75
Participantlol… sed?
its an imco policy… tight gits they are
but the pencil pushers deem it repairable as long as cost per job stays low (average over 50 jobs)
id chuck it in the bin, trust me, but theyll throw hundreds at it, u watch!
helo_75
ParticipantRe: wil163 doin my head in!!!
:rolls:
layman terms please 😳
helo_75
Participantwell, what can i say
2 choices…
fit the modified pcb and hope it works
or its a system problem
hoover, when u ask them , tell you to turn it right down.. good answer, and it works, just your foods not cold!
those machines were a pain, its ever since they changed the pipe work to freeze bottom to top, instead of top to bottom
hope this helps
helo_75
Participanthmm, did megger the machine, but that wont necessarily show a problem with the heater
ill give it a whirl when i go back
medieval implement?
helo_75
Participantno its the other one, behind it!!
-
AuthorPosts
