Forum Replies Created
-
Posts
-
Re: Zanussi stopping mid-cycle – heating element?
uid be checking the recirculation pump, its just the point where its supposed to start running 8)
i got one of them machines.. been fantastic.. glad it was easily sorted
those sort of things do happen. but at least its easily cured
good luck in your new home!!
bit like me i suppose.
in fairness on reading that, it doesnt look too tactful, but i do think that text can be read in a variety of different ways
but surely to come on here and post that message in that manner was unnesecary?
personally, if id have been called to that machine, id have made damn sure of the fault, not just cutting the plug off, and condemning it (especially since beko machines get a bit of condensation in the thermostat housing), but, in any eventuality, it should trip the main supply.
im pretty sure theres an earth problem, be that with the plug on the machine, or on the socket.. and the ‘beko’ recommended engineer was duty bound to clarify that.
my question would be to any engineer.. would you feel fine to leave that job, without at least determining that there was a suitable earth at the socket outlet?
i hope i know the answer
oh, and bein a lancashire lad aint all bad, is it?
lol
Re: Beko TLA6018S outer skin live (240 volts)
now thats probably the most ridiculous post ive seen in a long time
if the cabinet is live, then it should have gone down to earth, and blown the fuse/tripped the electrics
secondly.. how have wires enclosed in foam managed to damage themselves enough to catch the cabinet
all machines will kill if there isnt a suitable earth! id be checking my sockets/ plug from the appliance
something doesnt run true with the prognosis
oh, and your 7-day return of goods statement?
yep, if u take it back, unopened and unusedfurther to that, you have to have a service call to establish fault
if its faulty, yes, it can be exchanged… if it aint
well, u’ll be charged
and before u start quoting things, i work for comet.. what im saying is fact, just be carefull how you approach the engineer
so comet can swap it, but bosch can send an engineer?
yeah.. call comet, and ur gonna get hit for £25 when he pulls the plastic support out the back….
sheesh, why r people like that
b4 u do that, id check the connector between the pcb and the selector, ive changed the pcb and inadvertently put the plug on the wrong way round!!
worth a try
first thing id try is turning the thermostat down to zero
then see if it spins
if it does, heaters faulty
hope this helps
Re: Hotpoint WMT03
is it pumping, or syphoning?
got any flashing lights?
could be anything, some more info would be helpful?
Re: Zanussi WDJ1094 – trips electric-OK if element disconnec
did i really read that?
change the heater, ur not supposed to have any reading to ground!!!
Re: Hoover FR HNMF 3906 AT Refridgerator
you gotta be kidding, right?
yep, theres a big issue with them things leaking, and there isnt a cure, only to not put water in it (yep, thats the only way it wont leak!)
hoover have modified the nozzle 3 times now, each being worse than the last
the only hope youve got is to take the nozzle off, and stretch the spring that clamps the rubber hose (yep thats all that holds a few litres of water)
that makes it a tighter fit, and sometimes they stop, sometimes it stops it from working at all ( but at least it doesnt leak – and that came from hoover!)sorry to post bad news
helo
Re: Hotpoint CTD 40 not heating
lol, like the comet man doesnt know wot he’s doing?
we are qualified you know
sheesh, i wish youd give us some credit…….
Re: Hoover TV20 Not Heating up
is the filter light on?
cos if it is, its the thermal overload, which, contrary to other posts, means the thermostat has failed
complete heater unit, with both on would be recommended
and do unplug it, theyre live permanantly and it does get quite nasty if u forget to unplug!!
hope this helps
