[helo_75]

Re: WD62 Problem

isnt there a thermal fuse on the motor harness, im sure there is on that model

[helo_75]

Re: Drum Bearing On LG WM-1285FHD, Is it a pain to change?

a direct drive?

ur ambitious it has to be said

be careful when removing the stator, thsyre very fickle!

[helo_75]

Re: Ariston AIB16UK

check yer brushes in the motor

but make sure the machines unplugged

[helo_75]

Re: Hoover HW160m problem

i think id be checking the motor/ wiring to motor

theres a good chance some of the wiring is damaged, although the motor itself could be duff

plug out please

[helo_75]

Re: Hotpoint condenser dryer 31358 [CTD 85A]

it certainly has one on the front duct

u can see it if u look from th top, under the timer

other than that, itll be the pcb

[helo_75]

ahem, u sure the pumps running?

and how many stats does it have? 2 or 3?

[helo_75]

Re: Zanussi Aquacycle 1500 FS1555W

why does buying a washer mess up your wedding plans?

ask for one for a present

if the pcb and lock has gone, then it will be expensive, but the 4 flashes usually point to the motor

its ur call, but theres some good deals around at the mo!!

[helo_75]

Re: Samsung RS21DCNS evaporator core frosting up

yes, it comes attatched to the evaporatr!!! with a bit of tact, the heater can be taken off, carefully and refitted to the original evaporator

if you order an evaporator from samsung, it comes with the sensor, heater and thermal fuse, to eliminate further problems

not that expensive either

[helo_75]

Re: Gegsy Strikes Again!

so you’ll be back fitting zanussi washer dryer tubs tomorrow?

seriously mate, im glad your ok, we’ve all got the battle scars, kind of puts light onto all the idiots in the public forum, risking life and limb, and critcising us for recommending safety first

hope you remembered to unplug it 😛

and we’re proffessionals!

take care

rob

[helo_75]

Re: BEKO WMA1614W WONT PUMP

unfortuantely, its quite common, and its the pcb

its called a speed control unit, but it controls the pump as well

good luck trying to get hold of one

[helo_75]

Re: Bosch / Siemens wm suspension legs

bosch supply the drill bit.. im not sure of the part number though

ive done some of these, and theyve all been fine

[helo_75]

Re: Hotpoint WF540 new pump set up.

if u lookk at the wf321.. thats the new set up, should help with diagram, theyre all coming now with the pumps at the front, which is good news, u dont have to empty a machine full of water on the floor to empty the pump nemore!!!

[helo_75]

Re: Hotpoint Aquarius WD440 faulty controls

since when have tv’s and videos been classed as whitegoods? good to see ur aware of the facts 😯

[helo_75]

Re: e41 fault on zan w/dryer

its the green coil, on the 3 way valve

[helo_75]

Re: Samsung RS21DCNS evaporator core frosting up

yep.. hang on for mac or r600a, theyre the samsung guys.. they’ll be here at some point, i dont have that info to hand

[Author]

Posts