Forum Replies Created
-
Posts
-
i would think on the shaft, to keep the drum off the back panel, i really hope theyre not using that god awful vtd drum as a substitute
Re: Samsung RS21DCNS evaporator core frosting up
then if its iced up at the top, and u want to cure it.. change the sensor, the thermal fuse, and the evaporator cover assembly.. that’ll more or less hit the nail on the head
the sensor , btw is the one buried in the fluffy ice at the top, with the yellow wires
the new evaporator cover comes with a fan, with a slightly bigger hole for drainage, so it does helpt o change it
hope this helps
Re: Samsung RS21DCNS Condensor cooling fan fault?
erm, your live testing mate, and we dont condone that
incidentally, as posted before, the fan doesnt have a supply with the door open, and thats why you wont get 240v there
simple really
shut the door, and wait a few minutes, the fan shoud run
but please, dont live test, especially not in a moisture intensive environment, it could get nasty
hope this helps
Re: Samsung RS21DCNS evaporator core frosting up
you never mentioned the defrost heater?
didnt u check it?
i would, personally…
Re: Hotpoint WD420 Won’t Start
for some strange reason, ive had a few ‘f12’ faults
ive unplugged them , left them 15 mins and plugged em back in, its a communication error, so the machine tends to reset itself.. always the first thing i try…
hope this helps someone, somewhere
Re: Problem with Zanussi ZJD 125 Jetsystem Turbo Dry 1200
it isnt a hard job by any means once you’ve done a few.. id go along with penguins fault diagnosis.. does the machine have a digital display (i.e does it have a countdown timer in the display)
zanussi machines are considerably well made , and are usually worth spending some money on
difficult to say whether its a job you can do yourself, depends how good you are with your hands really
Re: Hoover FF with Drinks Dispenser – Leaking
oh dear, the dreaded hoover fridge freezer leak
not summink ive ever managed to cure, regardless of how many parts i fit
good luck!
Re: Indesit WD 11 Clicking Dial Flashes 8 times
yep, change the pcb and eprom, deffo with the plug out!!!!
Re: e41 fault on zan w/dryer
someone would have tried to start a program without shutting the door
since this would be the last recognised fault, it’ll stay there till its cleared
might not help you with your present fault!!
Re: Hotpoint Aquarius WD440 faulty controls
sounds to me like your looking for an excuse to send it back?
Re: Samsung RS21DGRS Ice Build Up problem
like im bothered what you think kr whatever
facts dont change, your wrong, your narrow-minded and ignorant, if its so bad, stop posting
simple really
or you can join the pc 12v fan brigade and start sending nasty personal emails
its a forum for help, not personal digs, so ill leave it at that
u sure ur not from horwich? 😆
