[helo_75]

Re: servis wiring

incidentally, all servis wiring harnesses, regardles of colour have the location printed on the wires themselves!!! that is of course if theres anything left of the cable!

ie th1 – thermistor/thermostat pos 1
or htl – heater live

that sort of thing
hope this helps

[helo_75]

Re: fridge freezing

theres a motorised flap on the top left hand side of the fridge

trouble is, on the early models, it gets stuck open cos ice forms around it

later ones a had a low energy heater attatched to it to stop that

unplug it, and get a hairdryer, and heat it up and the ice will melt and the motorised baffle(flap) will close, dont manually force it please

they freeze in the fridge because its a blown air system, and the air is blown in from the freezer, and with it being stuck open, the fridge acts as a freezer

theres no fix im afraid , just warm it up now and again, cover all your food up as well, that helps reduce condensation, so less chance of ice

trust me, ive seen a few

[helo_75]

Re: indesit dryer is60v seals

yep, v4

and like ive said before, the only way youll ever stop it scraping is to put the new drum in ( see previous posts)

lol, quality in vast amounts, eh

[helo_75]

this has to stop… NOW

ill say this once more
my immediate concern with your ‘fix’ was with the fact that youd snipped wires and left them there, also leaving trailing wires n stuff

id be greatly concerned if ANYBODY who was reading your post whod had trouble (and, as uve all read, theres plenty of em) considered your solution as a viable alternative

and thats the point i , and others tried to make

just supposing someone inflicted a quite serious injury trying to implent the same repair?

who would be to blame?

it will always be a grey area, im not saying it didnt and wont work for you, im saying that we , as ‘competent’ engineers need to consider public safety at all times, regardless of whether the information is free or paid for
i know u think im a little sarcastic in my responses, i just feel that there will always be people who take that kind of advice and use it badly

so, i’m gonna stop there… it was never about me being more clever or smarter than anyone else…

believe me, ive seen a lot of very nasty accidents inflicted on people who disregarded basic safety, and that will always be part of the reasoning behind any advice i , or any othe engineer might offer

an engineer that cares? believe it or not, most of us do ! this site has been created by people who do care, and want to help people.. and the horror stories we’ve seen (and theres some well documented in the trade area) make us more and more safety conscious, and , at every turn, that will always be paramount

thanx.

[helo_75]

Re: bosch WET 2820GB/13

or east… but either way, its not doing wot it should 😛

[helo_75]

Re: hoover caress

check the bottom plug on the pcb, the tub, for some unknown reason has a lip on it, right next to the bottom plug, and when its moved, it pulls the plug off

its the plug for the variable temp, so it wont heat, cos it cant read it

ive had that a few times

hope this helps

[helo_75]

Re: indesit dryer is60v seals

😕 the two seals in the kit (1703080?)

1 fits around the front air duct (its quite possible its fallen off, if its full off fluff, then its gone)

the other one fits on the rear panel, to a> push the drum further from the back panel, and b> more importantly makes a good air seal so the warm air circulates correctly

have a look, its quite obvious, and change the front plastic supports, they’re much better in the v4 kit

[helo_75]

Re: Cooling fan on Belling Countrychef 100DF

oh and df?
thats got a gas hob hasnt it? u really shouldnt be messing!! see previous threads regarding diy gas repairs
thanx

[helo_75]

Re: Cooling fan on Belling Countrychef 100DF

that little yello doodah is a trigger stat, and thats what makes the fan come on ofter 5 mins…. looks like the simmer stats gone to be fair

[helo_75]

Re: Not another Samsung SR2029CSS problem? ‘fraid so…

it will, because its blocked with ice behind the evaporator cover. it just so happens the fan is supposed to stop when the door is open (unless u’ve got some ridiculous 12v transformer with a pc fan taped into the inside with trailing wires) to try and stop the introduction of ‘warm’ air into the unit
thats why the fan winds down when u open up

if you dont want to defrost for 48hrs (and some ppl dont, because they lose the freezer food) im sure the nice guys here can supply you with the the modified fan and evaporator cover

or

u could try the defrost thing to start with

then take it from there

[helo_75]

Re: ZANUSSI ZCM611 DUALFUEL OVEN GONE BANG WORTH REPAIRING??

glad u got it sorted

[helo_75]

Re: Door

u might be able to help us by telling us what make/ model of machine it is.. is it integrated or semi integrated.. im sure it would help!!!

[helo_75]

Re: Samsung SR-S20

exactly

[helo_75]

Re: Zanussi ZHQ757 built in oven problem

have you tried the grill since the wire broke off?

[helo_75]

Re: Samsung SR-S20

and still stupid and unnecessary

really people, pcs fans are for pcs’s not fridge freezers

and ill keep saying it , regardless of the nasty emails i got from certain people, these machines are easily repaired if your not too ‘smart’ to take the advice on offer

thanx

[Author]

Posts