hotpnt

Forum Replies Created

Viewing 15 posts - 256 through 270 (of 719 total)
  • Author
    Posts
  • in reply to: Ariston AWD 12 water leak #254599
    hotpnt
    Participant

    Re: Ariston AWD 12 water leak

    ok, well, the top contains the ‘holes’ where the water is directed into the 3 sections of the drawer, the water should get sprayed into the drawer then down the hose into drum, if it is leaking from the join (near the top) then there is another reason wht the water is that high, either the holes in the top (viewed with the drawer out) are blocked/obstucted, causing the water to be aimed at the joint, or the drawer is unable to drain into the drum, though this would usually lead to a leak down the front of the machine,
    Try a fill with the drawer out & see which way the water is aiming

    in reply to: last day for creda #254592
    hotpnt
    Participant

    Re: last day for creda

    thing is there are still plenty of people who ask after the creda brand, though the origional creda tubs were a pig to change

    in reply to: Indesit Smart Card Reader #254293
    hotpnt
    Participant

    Re: Indesit Smart Card Reader

    ive only fitted 2 lower rear mounted arcadia modules so far, but programmed both with the black key that i use on evo 1 & 2 using mem writer

    in reply to: Indesit Smart Card Reader #254289
    hotpnt
    Participant

    Re: Indesit Smart Card Reader

    hi, which old test key were you trying to use on arcadia?, i use the black one to programme them, ok so far

    in reply to: hotpoint wt960 , LCD fault #254367
    hotpnt
    Participant

    Re: hotpoint wt960 , LCD fault

    ok then, my mistake, i took the bit about getting the part free that he was hoping (as many do) that it could be self fitted

    in reply to: hotpoint wt960 , LCD fault #254365
    hotpnt
    Participant

    Re: hotpoint wt960 , LCD fault

    the led’s on those panels do fail & flicker, it wont affect to programmes, but as you said it will be a pain when they all go out, as for getting the part for free, forget it, it wont happen,

    hotpnt
    Participant

    Re: NO CALL OUT CHARGE… (So how exactly does that work???)

    there is still a guy here that advertises every week in the paper without fail “No Call Out Charge & Most Jobs Just £15 + Parts”

    in reply to: bf1620 hotpoint #253173
    hotpnt
    Participant

    Re: bf1620 hotpoint

    i have always re-used the origional ones without any problems

    in reply to: Indesit To Close UK Service Down? #252230
    hotpnt
    Participant

    Re: Indesit To Close UK Service Down?

    d&g pay a lot more than £16 a call though,

    hotpnt
    Participant

    Re: NO CALL OUT CHARGE… (So how exactly does that work???)

    think you have to say there will be a charge when you take the call, just had phone go 5 mins ago, ‘do you charge call-out?’ i get asked, well i tell him no but the job will be £30-35 labour, sounds like heater for £15 so about £50 to fix, they then ask if i can call & check it first, told them there would still be a charge, they say thanks but no thanks, i have not lost a job as they wanted my time for nothing!,

    in reply to: Indesit To Close UK Service Down? #252226
    hotpnt
    Participant

    Re: Indesit To Close UK Service Down?

    can you really see comet taking on the work at £16 a call?

    in reply to: Indesit To Close UK Service Down? #252214
    hotpnt
    Participant

    Re: Indesit To Close UK Service Down?

    could see it some time in the future, but not these days, who would take the responsibility of all the garantee work?, oh yeah, me!, 😆

    in reply to: Hotpoint RLAV21 too warm #252302
    hotpnt
    Participant

    Re: Hotpoint RLAV21 too warm

    yes, it does not sound good, depends if you can get a local engineer to check the system, but on what was prob a £150 fridge, it could be an expensive fix, for a gas call prob £70 min

    in reply to: Hotpoint RLAV21 too warm #252300
    hotpnt
    Participant

    Re: Hotpoint RLAV21 too warm

    if the compressor is running but not cooling it will be a gas leak/blockage

    in reply to: GE to sell Hotpoint. #252153
    hotpnt
    Participant

    Re: GE to sell Hotpoint.

    Hotpoint has been 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} merloni for a few years now, they bought 50{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} from marconi & 10{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} each year from GE

Viewing 15 posts - 256 through 270 (of 719 total)