[hotpnt]

Re: NEW SHAPE TRANSIT

Update, van alone would be £6.5k + vat

[hotpnt]

Re: wd860 blue screen gone

hi, if its just the screen that slowly faded until it has gone black, & you can still set the machine to wash, then it will only need the Console PCB

[hotpnt]

Re: Washer/Dryer internal Trip?

1st thing to check is that all of the buttons are free & not sticking, (if any of the option buttons get stuck then you would be unable to turn it on)
if they are all free, then the main module will be faulty as you have power to the machine when the lights flash when turned on,

[hotpnt]

Re: Hotpoint CTD40

you cannot switch off when in fault error, unless you open the door or disconnect power, if the NTC & wiring are all fine then it will be module fault, common fault with these

[hotpnt]

Re: Zanussi ZWF1421W drum stuck

then it was thrown off when drum seized, still not looking good, does the inner drum look like its ‘dropped’ like its not sitting even to the seal?

[hotpnt]

Re: Right to repair your own car under threat?

probably, it wouldn’t take much to programme a module that needs re-setting with manufacturers hardware for every fault, ie pump o/c, valve o/c, just be left with the mechanical faults then?

[hotpnt]

Re: NEW SHAPE TRANSIT

possibly, more news soon……

[hotpnt]

Re: New van.

any takers?? ill throw in £2k worth of spares with it!!

[hotpnt]

Re: Indesit WIDL 126s Problem

hi, lights 3 & 4 is an F03 NTC thermistor fault, check the small wires on the thermistor by heater, and the connections to the board, may be loose, or another board fault

[hotpnt]

Re: Ariston Margherita A1535 – works some days, not others!

usually the click will be the door lock locking, if nothing else happens it is most likely that the motor brushes have worn, please unplug before checking them

[hotpnt]

Re: Problem with error code 1 on Ariston Margherita 2000 w/m

Hi, just to avoid future confusion, F-01 IS NOT related to a dryer fault, IT IS a motor triac/module fault,
The codes for dryer faults are F-13, F-14 & F-15
Just trying to prevent anyone looking for the wrong fault

[hotpnt]

Re: HPT CDT80

fitted one today for same reason, check if new or old type pump, if old then u need the conversion kit

[hotpnt]

Re: Bored on a friday night

yeah, where did adam mk2 go?

[hotpnt]

Re: Problem with error code 1 on Ariston Margherita 2000 w/m

hi, just to cement iadom’s comments, dryer faults on these models would normally give 13 flashes, the one flash is, in 99.9{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of cases a module failure, triac fault, or, the board believes a triac fault, either way, unfortunatly, it will need a board to rectify

[hotpnt]

Re: servis machine

or the ISE 2

[Author]

Posts