Forum Replies Created
-
Posts
-
Re: Hotpoint WMD740 Ultima Drum Not Spinning
Don’t worry about that, they may ask for your model and serial number. They can tell it’s age from that.
Unless of course it is over five years old, as a WMD 740 could well be. In that case it would not be economic to repair. 🙁
Re: Hotpoint WMD740 Ultima Drum Not Spinning
Hotpoint’s labour charge is just over £100, where are you going to buy a new machine for that money. 😉
Re: Hotpoint WMD740 Ultima
You need to contact Hotpoint/Whirlpool direct.
It sounds like the main bearings have failed which will mean you will need a complete main drum assembly. Your parts are covered for five years, you will only have to pay the labour charge.
Re: Another Successful Conference
Only joking Bryan, it was a very enjoyable Thursday/Friday, well done to all involved.
And the events I witnessed on Sunday at Wembley made it a perfect weekend. 8)
Re: Another Successful Conference
And if you want a meal on the Friday night you had best order it now, it may just be ready in time. 😉 😆
Re: Hotpoint WMUD843 Ultima Error F11
Difficult to be certain, pumps can fail intermittently but it could well be a faulty pcb. 🙁
Re: Indesit IDC85 Pump issues
The pump does run continually on these machines even when empty. Sounds like you need a new pump assembly.
Re: Football 2016/17
Well the mighty REDS won the EFL Cup final beating Dons Saints at Wembley.
United very lucky and showing the physical strain of playing five games in two weeks versus a side with only today’s game in the same period.Nothing wrong with their disallowed goal from where I sat either.
You have to give credit to United for never giving up and battling to the end no matter what. 8)
Re: New Moderator
Well its were we slag Martin off mainly but there are plenty of other targets , not all of them members of the public either. 😉
Re: aqxxf149 pi no spin
Anything and everything, OOB due bad loading, wiring connections, especially at the motor plug end, motor, module, pressure switch etc, most of those faults should be throwing up an error code though?
Re: In search of the fourth cord
This bod might just be a caution,
Re: One for the oldies 37275
[quote=”electrofix}
quite simple when you have done one
Even easier when you have done lots of them, doesn’t even have the sneaky screw behind the control knob. 🙂
Re: Hotpoint WMUD843 Ultima Error F11
The decision is yours alone, I have never, ever paid for insurance or warranty on any appliance that costs under £350/£400 .
Re: Hotpoint WMUD843 Ultima Error F11
F11 is ‘supposed’ to be a pump related fault.
Could be wiring connection faults between pump and module, faulty pump, pressure switch, faulty module etc. As you have had a cleaner through it you could have dislodged some internal gunge that may be blocking the pressure (water) level switch chamber. As this machine has the dreaded sealed drum then clearing such a blockage is not easy.
