Forum Replies Created
-
AuthorPosts
-
iadom
ModeratorRe: World Cup 2006
Two cracking goals from Gerrard but as a neutral I thought that West Ham definately shaded it in normal time. Great game after last seasons match, when one of the teams decided not to play football. 😉
iadom
ModeratorRe: Missing ISE 🙁
Went to an old Indesit at 2.30 this afternoon, motor blown. Gave her a leaflet, got home at 4.30, message on answerphone, New ISE delivered at 3.45, going to do install in the morning, number 11 8)
iadom
ModeratorRe: Hoover new wave plus 5
Sticking the odd smiley in here and there can often help to give more meaning, and help to convey your thoughts in the way you intended. 😉 🙂
iadom
ModeratorRe: hotpoint blowing main fuse
You really need to get this machine checked out by someone with the correct test equipment and the required skills. You may have already damaged the main control unit by blowing the fuses, any electrical component in the machine can blow a fuse if it is faulty. Click the link in my sig to see if we have someone who can help you.
As a test on the motor you could always unplug the motor and try the machine with the motor isolated, if the circuit breaker does not trip then you have your answer.
Power off at all times when poking around inside.
iadom
Moderatoriadom wrote:
kwatt wrote:
A friend of mine used to say that rugby was a game for thugs played by gentelmen and football was a game for gentlemen played by thugs. 😉K.
Well that could certainly apply to the current Leeds side, I dearly hope that Watford ( sorry Palace ) can beat Leeds in Cardiff, the last thing the premiership needs is Leeds and their loutish fans. They beat Preston in the qualifiers last night but collected 8 yellow and 2 red cards. Preston’s Brett Ormerod was stretchered off after only 11 minutes with a suspected broken leg after an awful tackle from Douglas, and the Preston keeper has a suspected fractured cheekbone after Creswell trampled on him. The ghosts of Billie Bremner and Norman Hunter are alive and well in this Leeds side. 👿
I rest my case. 😥
iadom
ModeratorRe: Cricket, lovely cricket.
There you go Don, I said that Saj Mahmood, a stout hearted Lancashire Lad would do the trick, figures for his first spell in test cricket.
5o, 2m, 3 for 9. 🙂
iadom
ModeratorRe: Hotpoint BWM12 Gasket Rear Clamp
I have heard of one or two people ditching the original clip and using a Zanussi spring garter.
iadom
ModeratorRe: Hotpoint BWM20 Integrated WM.
I didn’t think it was Ariston to be honest, looks much better than that.
iadom
ModeratorRe: Hoover new wave plus 5
The numbers with a minus sign are displayed when the machine is counting down through the various sequences, sometimes you have to wait until the timer on the module moves to the next sequence.
For instance -2 means it is going into spin cycle ( which I think is programme 9 or 10)
-3 means it is on or counting down to rinse number 4.Programmes.
1. Whites
2. Fast coloureds
3. W/Nylons ( don’t ask me what the ‘W’ stands for., White nylons.??
4. Min Iron
5. Non fast coloureds
6. Delicates
7. Woollens
8. Cool wash
9. Slow spin
10. Fast spin
11. Quick wash
12. Conditoned rinseiadom
ModeratorRe: Hotpoint TDC30 T/dryer
Check your e-mails Andy. 😉
Jim.
iadom
ModeratorRe: Hotpoint BWM20 Integrated WM.
Thanks for that, it looks to well made to be an Ariston, the really funny thing is this customer initially had an Ariston that broke down several times in first six months, so changed it for this one. 🙂
iadom
ModeratorRe: Hotpoint WMA32
Two wires with AMP tags, sheathed wire from heater to first terminal from the right looking from the front, other wire on terminal next to it goes to pressure switch.
Small square block goes into selector switch, should only fit one way.
Bottom edge from the right, 10 tag block onto X1. six tag block onto X5, two tag to pump next to this, two tag to pressure switch next to this, both of these on X9. On some machines this can be a complete block. Two tag block to thermistor to X2, small 4 tag connector to variable controls, X4.
HTH.
Jim.
iadom
ModeratorRe: bs 14107 wont fit
I have only changed one, a few months ago, it was also a very poor fit and I had to bend everything I could, fan blades, element, leave out one fixing screw, etc to affect a repair.
iadom
ModeratorRe: Style over substance.
gegsy wrote:You can get arrested for dubbin the donkey 😕 or was it dobbin 😆
Greg
No, it was Muffin the Mule. 🙂
iadom
ModeratorRe: Style over substance.
gegsy wrote:Linseed oil hugger 😆
Greg
I would reposte with ‘Dubbin’ but I suspect you may not be quite old enough. 8) -
AuthorPosts
