Forum Replies Created
-
Posts
-
Re: BEKO WM1210 WK1 pump
Its not a temp drain hose, it is like the one first shown on the early ISE, with a small branch hose linking into the grey plastic outlet hose. I would guess it may be an attempt to prevent suds lock ❓
Re: BEKO WM1210 WK1 pump
Thanks Dave, this is quite a rush job, four year old Beko, family of six with two tumble dryers, another ISE sale is hanging on me sorting this one quickly, I have a two hose pump on the way, may just block off the small hose temporarily. 🙂
Why do manufacturers need such long, useless part numbers, six digits within one model range is more than enough for anyone. 👿
Re: last post date and time is wrong..
Go to your profile at the top of the page, scroll down to Timezone and alter it to GMT +1 and you will be up to date like the rest of us. 😉
Re: Ariston Margherita A1535 – Problem – Urgent Help Require
spincycle wrote:…..anyone got a magic wand….I think I might need a miracle!
No what you need is a sledgehammer, 😥 8 flashes is the nemisis of all the unfortunates who choose to work on these machines. It is supposed to mean a heater relay fault but in reality can be almost anything from bad connections, faulty pressure switches, modules, NTC’s etc, etc. Why not ring him back and give him a chance to try and sort it.
Re: Servicing/Diagnostics
No problem, I have installed 7, and after the Easter lull have two very strong possibles today. 🙂
I may even have time to sit and watch one of them sooner or later. 😉
Re: Anguis in herba
I still think it could be one of his kids, if he has any, reading all his other posts that one has to be by someone else.
Re: WMA bearings
Can you post pictures, I’ve never come across these and Partfinder makes no mention 😕
Re: hotpoint flashing
Still the same error code display, strange one that, what happens if you try and select Prewash, Prog P ?
Sounds like another case of dodgy Merloni electronics. 😥
Re: hotpoint vtd65 not heating up
richsmif wrote:
Typical they sell the unit as a kit when you only need 2x 99p thermisors.
They are not thermisors [sic], they are thermostat and thermal safety cut out. They have modified the back panel slightly which is included in the kit.Re: Anguis in herba
Either that or one of his kids has got at the PC 😥
I will e mail you the page Martin.Jim.
Re: Anguis in herba
I have removed the post from agro, I have saved the page in case anyone wants to see it, quite what he was thinking about posting that in Trade Technical, I do not know.
Jim.
Re: Creda T620CW tumble dryer
Get someone in, 😉
There is another thermostat in the upper door surround and also a timer in the base that controls the heater. It is also possible that the main timer is faulty (not as common) . Did you check the elements electrically before changing them?
Please remove the plug if you intend to continue.
