[iadom]

Re: Top loaders

Martin wrote:Zanussi TLE1116W…not a patch on the Bosch though 🙁

Had a look earlier a pictures of both, it is possible that the controls on the Bosch machine will be just above the height of the freezer. One problem I hadn’t thought of until looking at them is the filter access appears to low down at the front, that would mean moving the freezer to clean it out. The only other alternative is a new kitchen. 😥

[iadom]

Re: timers

tonyclifton wrote:cheers iadom i was referin to hpt wm timers got a few were first track has blown tried to hard wire a couple but nothin at top to solder to as took it all out when it blew

thats why I remove the wire completely from the plug, it nearly always damages the first contact in the plug.

[iadom]

Re: how good is this web site

Twoten wrote:

Bringing together the independents of this industry and giving them a voice can only be a god thing.

There you go Ken, the truth is out. 😀

[iadom]

Re: timers

WHat make/models are you referring to Tony. I always repair the tracks on Hotpoint WM timers blown by interlocks with a 99{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} success rate. It is normally just the first edge connection that goes, I cut the wire out of the plug and solder a short piece of wire to the nearest component leg on the damaged track then butt connect to the original wire. I have used this method on both the hybrid timer and the earlier Timer/module WM series with tracks damaged by motor brushes shorting out.

[iadom]

Re: Slugs in Dishwasher!!!

NWAR wrote:
Wouldn’t have thought it would have made it all the way up the drain hose and through the pump, but there didn’t seem to be a better explanation.

But who held the non return valve open for it.? 😉

[iadom]

Re: An Age Thing.

Goatboy wrote:I’m gonna kinda keep quiet on this one.

Kev said I look 12 😳

I’m getting my coat…

No, you where not listening, he said acts like, not looks like. 🙂

[iadom]

Re: UKW Subs Funding – the future?

If it makes the site run more smoothly than of late then I am definately an “Aye” .

[iadom]

Re: Cricket, lovely cricket.

England well on top in Multan, Pakistan 274 AO, England 174 for 1 at tea. 🙂

[iadom]

Re: Ariston ALD12S Washer/dryer

Thanks Chris, it did look a nasty piece of work, still, all grist to the mill. 😥 🙂

[iadom]

Re: An Age Thing.

Even better than the bloke who sent me £20.00 for advice on the phone, yesterday a female customer said “do you mind if I ask how old you are” I obviously said “how old do you think” , when she said 45, I was almost tempted to cancel my invoice. 😀

58 next Wednesday and almost 38 years on my knees peering into white goods, but still manage to play 3 games of squash a week. 8)

PS, which other thread Bob,

[iadom]

Re: Hotpoint DWF50 fault codes

Done. 🙂

[iadom]

Re: Known Error Codes

Hotpoint DWT 10, DWF 50 & DWM55 also FDW/SDW60 dishwashers

Led 1 Intensive
Led 2 Normal
Led 3 Eco
Led 4 Fast
Led 5 Prewash
Led 6 Delicate

3…..Overflow (water in base)-Leak from water line
4…..Solenoid valve fault -Inlet valve,connections
5…..Thermistor circuit-Thermistor c/w timer
6…..Timeout heating-NTC detached from casing
3+4.Timeout draining-Pump connections,blockage,module
4+5.Timeout filling-Tap off,Inlet valve,connections,timer,water turbine
3+5.Circulation pump not working- pump,connections,capacitor,module
3+5.Filters blocked-Mesh plate,filter or microfilter,pressure sensor
1+4.Software recognition error-Timer not programmed,wrong keypad
4+6.Heating circuit-heater,connections,module,relay
3+4.Hardware version (timer)

[iadom]

Re: Hotpoint DWF50 fault codes

Will post DWF50 codes later, off for a game of squash now. 🙂

[iadom]

Re: A Radical Thought

As a relative newcomer to the site, although I lurked for a long time just to get the lie of the land, I quickly decided that I would like to become a subscriber. I admit that ATM I cannot think of a specific use for the funds ( I could use a holiday though 😉 ) I am in agreement with Alex on this. I have done a rough comparison of my income in the past six months and my weekly take has increased by just over £100 per week, or around £3000. Not big money but a nice increase for a one man operation. It may be coincidence but I somehow think that it is in no small way due to the help I have received here. I realise that being a subscriber would not have made a major difference but I have to say that I am a person who does not always ‘expect something back’ and so I am very happy to subscribe, the next bright idea may be just around the corner.

[iadom]

Re: Bosch WFF2001GB/01 Heavy duty doorseal

Martin, where is that on Partfinder, does it include WMA models. I have a customer who would gladly pay £42 for a door seal , I have fitted four to the same machine this year, teenage daughter with serious skin problems.

[Author]

Posts