Forum Replies Created
-
Posts
-
Re: Hoover AL150
Didn’t want to start another thread so will stick it here.
Another AL150 problem. Symptoms, machine completely dead,
Have live feed to door lock but no neutral return, tried new lock just in case but no joy.
On/Off switch & pressure switch fine. Neutral link from door lock to bottom of module is ok and I have a neutral feed from top of module.
Have sent module to EMW for test.
Anyone else seen this fault.
❓Re: Hotpoint washer/dryer keeps coming up with test on.
Anonymous wrote:, if its possible to take any glory in helping with a washing machine problem. Oh well, back to my sad life….
Thats what a lot of us do for a living, 😀Any help is always much appreciated.
Re: Hotpoint washer/dryer keeps coming up with test on.
I think the that whoever did that revue must have been stoned.
WHAT IS IT?: The king of washing machines , yeh right. 🙄
Re: Hotpoint DWF40P only beeping
Error codes for this machine are in this forum’s Error codes list, on page #2 posted by lotusray.
dishwasher fault codes with bit 100 timer(written on serial no)
led1=overflow water in base
led2=inlet valve
led3=thermister
led4=timeout heating
1+2timeout draining
2+3timeout filling
1+3filters blocked
1+4software error
2+4heater
3+4timer hardware
Reset is achieved by turning the selector to ( you’ve guessed it ) RESET, switching on then waiting a few seconds. All the lights should go out if there is no fault.Re: Zanussi ZJD1285
Thanks for the info, actually the WMA bearings look to be the exact same size, pity the seal is different.
Just checked and the WMA bearings are the same size. 🙂Re: Zanussi ZJD1285
Still waiting for the bearing kit for this.
Anyone know of an alternative to Qualtex’s BKT 80. Do Zanussi do a complete kit or do I need to order separate bearings and seal.
Customer giving me some earache now. 😥Re: crusader 37667 condensing dryer
Are you sure about that model No: could it be a 37662 ?? This model has two capacitors.
Cancel that, I was looking at a Creda. The Crusader 37667 does have the small reversing timer in the base. Never had one fail though.
Timer No: 1701133 list £26.88 + vat.Re: Ariston Oven Shuts Down
This model has a safety thermostat at the back which is more than likely cutting out. Would suggest that you get the cooker checked out ASAP. How long has it been installed, it may not have sufficient space to allow for cooling around the unit, or the ‘tangental’ cooling fan may have failed.
you could try here
Re: Fitting a drive Belt to Hotpoint washing machine
Phidom wrote:Yes, Hotpoint have gradually gone from having the easiest belt fitting access/design on the 95 series made in the ’80s to one of the most difficult, on the WMA machines.
Takes all of two minutes with the plastic bag tie technique. 🙂
Re: proline condenser dryer
Part No: before date code 19 (July 03)
1701768 .. 2500 watt.After date code 18
1702697 .. 2300 watt.Re: Indesit Cooker Model: KN6042WG/V
That part is officially obsolete. It is not the type of part that someone is likely to have hanging around either, but you never know. 😥
Re: Hotpoint drum lifters
Tell them to avoid washing trainers etc at all costs, also try not to underload with heavy items.
NB. Do not give any long g/tee on these lifters, they will come adrift again.
Re: Hotpoint drum lifters
Version 1 should be fitted together with a small rokut rivet.
You need Version 1 Lifter Fitting Tool Kit. part No:5600224.
This includes a drill, fitting tool and 10 rokut rivets plus fitting instructions.The bad news is that it is b****y useless, they will still come out in no time at all. 😥
