Forum Replies Created
-
AuthorPosts
-
Jazzmeister
ParticipantRe: Rangemaster Induction E4
Must be a newish / still under warranty rangemaster, tell them to call them to repair it as it may need the whole induction hobtop changing, as to the fault it is either un-configured or the board/ring is u/s!
Jazz!
Jazzmeister
ParticipantRe: Belling dishwasher IDW603
Anyone??
Jazzmeister
ParticipantRe: Cuisina range cooker DF1000SS
Thanks guys help is very much appreciated, will phone and book spares tommorrow!
Jazz!
Jazzmeister
ParticipantRe: Viscount cooker model PC60GW
No it isn’t a commercial cooker… Looks very Beko ish! Think gahndi could be right. Hmmm looks like I am hittingy head against a wall on this one! Thanks for the replies though!
Jazz
Jazzmeister
ParticipantRe: rangemaster professional 90 ceramic
As Jonah said…but there is usually a direct feed from the terminal block to the timer….so if it isnt the terminal block it will more than likely be the timer!!
P.s ask the customer for the instruction book….wiring diagram is in the back!
Jazz!
Jazzmeister
ParticipantRe: Supplier of decent commercial wahing machine?
it is for use in a home for handicapped people…approx 5 adults in total + genral household items…why would ise offer a warranty on this load?
Jazz
Jazzmeister
ParticipantRe: LG W/M stops at 17 minutes
If you leave this for 45 mins or more it will revert to a UE fault…unbalanced error!
Jazz
Jazzmeister
ParticipantRe: Supplier of decent commercial wahing machine?
Cheers guys
Jazz
Jazzmeister
ParticipantRe: Brandt & De Dietrich Indiction Hob Faults
As EFS says this is normal on these appliances….if you put both on max…1 will drop to 8 the other to 7…making the max that is 15! any variations of the 2 will only ever add up to 15!
Jazz!
Jazzmeister
ParticipantRe: Electrolux dishwasher not heating
Check the module/programmer, take it out and check the connections to the big black relay on the board! probably blown. Repair , replace relay or replace borad!
Jazz!
Jazzmeister
ParticipantRe: UKW Monthly Insurance
Ken could you e-mail me the info and forms please thanks
Jazz!
Jazzmeister
ParticipantRe: Manufacturer(s) Seeking Repairers
Got mine too hopefully…. and yes i am up for this! and yes i do gas too! 😀
Jazz!Jazzmeister
ParticipantRe: Beko DWD4310 d/w not filling
Or wiring loom required, have had this 3 times before!
Jazz!
September 25, 2010 at 1:19 am in reply to: Teka/Kuppersbusch induction hob Model: GKST 60 i4 #331106Jazzmeister
ParticipantRe: Teka/Kuppersbusch induction hob Model: GKST 60 i4
I think that is either a configuration error or….pan sensor problem , if memory seves me correctly!
Jazz
Jazzmeister
ParticipantRe: Hotpoint dishwasher dead.
The haier type (if this is one) will not let you programme it if the motor has an earth fault on it. This usually means a leak and water in the base has gone into the motor…….
Dunno if this will help
Jazz!
-
AuthorPosts
