Forum Replies Created
-
AuthorPosts
-
johnmac11
ParticipantRe: Christmas 2014
Hi T,
The village rest looks fine by me as I see they do a reasonably priced latte and have haggis starters :rotfl:
John
johnmac11
ParticipantRe: Whirlpool T/D belt
Here you go.. 481235818164
John
johnmac11
ParticipantRe: Hotpoint wd door part number info required
Thanks Don.
johnmac11
ParticipantRe: Duel fuel cooker repairs
Look at this previous post on the subject.
John
general-trade-forum/working-gas-cookers-information-t66145-15.html
johnmac11
ParticipantRe: Faulty new beko grill element.
Connect are talking ballocks. I had the exact same problem last Christmas with 4 different elements they sent so I went to the warehouse and tested 5 elements they had in stock and all had the same fault. So that was 9 in total, and the part number was 300180414
The girl on the trade desk said to me that they all look OK :rotfl:I gave up in the end.
Johnjohnmac11
ParticipantRe: whirlpool G2pDwi
Probably has a dodgy wash pump, read this which might explain your symptoms.
http://www.ukwhitegoods.co.uk/help/fix- … -pump.html
John
johnmac11
ParticipantRe: whirlpool instruction manual 854183815020 help!!
User manual and install manual attached.
John
johnmac11
ParticipantRe: Whirlpool 10kg new drum paddles wont fit
Loolks like you have the wrong part. For your model the following are the drum lifters.
480111101778 Drum lifter 1x
480111101779 Drum lifter Set 3xJohn
johnmac11
ParticipantRe: Cooke and Lewis gas hob??
Thanks Carl,
I got it, I will let you know whats needed once I see it on Friday.
John
johnmac11
ParticipantRe: Fisher and Paykel DD605IH
You need a softener unit part number 522539.
john
johnmac11
ParticipantRe: SEPTEMBER 2014 MEETING
Address is in the 1st post above, meeting normally starts around 9.30-10.00.
John
johnmac11
ParticipantRe: Whirlpool oven configuration codes
In my time with Whirlpool the configuration code was immediately after model number on the rating plate so in your case it would be AKZ196/1X **.
It is usually done in a slightly larger font and the code would be a number between 1 and 39.On the later models the code is in the service manual.
John
johnmac11
ParticipantRe: Britannia Range Cooker model SI9TF
This has been covered on previous posts, you can work on the electrics if not Gassafe registered.
general-trade-forum/working-gas-cookers-information-t66145-15.html
John
johnmac11
ParticipantRe: Whirlpool oven configuration codes
The configuration code for 858519615021 is 36
HTH
John
johnmac11
ParticipantRe: AWO/D 7120
That is the programmed board so it should work right away, Pm me your email address and I will send some info.
John
-
AuthorPosts
