[jontymox]

Re: Britannia SI-11XGC-SLK-K Range Oven Timer Dead

will do,

thank you

[jontymox]

Re: Britannia SI-11XGC-SLK-K Range Oven Timer Dead

Is it difficult/possible to power up the timer to ensure the new unit is not dud?

Seriously struggling with this problem…

jonty

[jontymox]

Re: Zanussi ZVC66030XA Hobs Not Working

Good evening Dave,

Thanks for that; the PNC is: 948904093

[jontymox]

Re: Hotpoint EW81G Cooker Hob Wiring Diagram

Thanks Dave,

Yes, that helped… the exact EGO regulator wasn’t listed, but was close enough to ascertain that I had a neutral connection incorrect.

Thanks again,

jonty

[jontymox]

Re: Miele WS5425 (10/68542276) W/M Drain Light Flashing

Good evening Dave,

No, haven’t checked the above which could be the cause.

Will return and check the above.

Thanks,

Jon

[jontymox]

Hotpoint Dishwasher Board Programming Related Problem

Good morning all,

I’ve renewed the main board on the following: Hotpoint SDL510G Dishwasher (36685980000) but now it will not switch on.

The module was programmed satisfactorily, and completed the download with the solid green lamp on the reader illuminated.

However, the dishwasher will not switch on, and I wonder if I’m missing something obvious following the above?

I’ve checked the wiring to and from the display module, which is fine, together with the connections on the main board.

Now beginning if there is a problem with the new main board, or if a fault has coincidently developed with the display module…

Any help much appreciated!

jonty

[jontymox]

Re: Hotpoint SDL510G Dishwasher (36685980000)

Struggling with this one.

Not sure whether their is a problem with the new main control board, or if the display unit has failed. (looks ok/no heat damage)

I wish we could test such things conclusively!

jonty

[jontymox]

Re: Hotpoint SDL510G Dishwasher (36685980000)

Thank you kaibart,

Possible new module fault?

jonty

[jontymox]

Re: Hotpoint SDL510G Dishwasher (36685980000)

I’ve just replaced the main board, and programmed it accordingly.

However, the dishwasher will not now switch on!

When programming the board, the panel lights all flashed at some stage of the download, which was successfully carried out.

I’m wondering if I’m missing something obvious, or haven’t done some procedure following the download?

The wiring to and from the display module is fine, so i wonder if this has failed for some reason?

jonty

[jontymox]

Re: Hotpoint SDL510G Dishwasher (36685980000)

Good morning Dave,

No, but when the dishwasher shuts down, power remains along the flex.

I checked the above when the fault occurred to be sure.

jonty

[jontymox]

Re: Hoover DYN9164DPG 3100500913183080 Error: E08

The only part number I have is a Connect Distribution part no: 5045382385760
which I trust helps.

jonty

[jontymox]

Re: Hoover DYN9164DPG 3100500913183080 Error: E08

Yes, main board was faulty.

Will try and locate part number, as it was over a year ago.

jonty

[jontymox]

Re: Hotpoint LFT04 UK/TA Dishwasher Spray Arm Diverter

Thanks iadom,

I’ve ascertained that the “water dispenser” is also referred to as “pipe, wash motor to spray arm.”

I may need to return to make sure it isn’t blocked, and wonder if the problem is caused by a weak pump?

[jontymox]

Re: Stoves Richmond Range 550E (444449013) Hob

Many thanks Seamy,

That all makes sense, as when I had a look I’d pulled the cooker out.

Customer will be pleased.

Thanks again,

jonty

[jontymox]

Re: Bosch WTW86560GB/14 Tumble Dryer Problem

Good morning all,

Replaced suspect door switch/lock and fault remained.

Established reset required – press and hold menu button for five seconds – success!

jonty

[Author]

Posts