Forum Replies Created
-
Posts
-
Re: John Lewis d/w
I have to give that a look will run 1 wash all the way through fine then 2nd wash it leaks odd 1 but il give it a look tomorrow when 1 go back cheers Kai
Re: Bosch dishwasher
Customer bought a new dishwasher and ask if I want the old 1 for spare so I had a closer look float microswitch had burnt on the wiring so that would be the problem after I replaced the jug and pump
Re: hoover vtc 86nb no heat from dryer at all
Maybe a fault on the heater it will require you to test with a multimeter, yes it is worth repairing kai
Re: Indesit f/f
Hi Dave model number is correct it’s a built in not a frost free here is number listed on connect this is the only info I’ve had off customer hoping not to pull it out if not needed 😯
Re: Hoover DXA43WA
Cost of universal pump genuine 1 on eBay delivered £10.00 Not even worth a try a 😐
Re: Hoover DXA43WA
Hoover have problem with the pump as these machines are built in prc so I would change the pump as long as you have chè ked for blockages as suggested above.
Re: Hotpoint FTCF87BGG
Why don’t you try bypassing the stat to see if it comes on or resetting it with a small pin
Re: Gas Regs and windows in kitchen
Right just to clear this up for you if the kitchen doesn’t have a openable door or window to the outside of the property ventilation is required as it states in bs7671 this can be in the form of a extractor fan or a vent it also comes into play if the room size is a size where ventilation is required, I hope this clears things up for you
Re: LG F1443KD6 11kg not spinning.
I would suggest unplumbing the machine as the whole backpanel has to come off and you will need room I laid the last one I done face down with a settee pillow underneath motor should be covered buy LG for 10 years on these but If I was to guess I would go hall sensor 1st
