Forum Replies Created
-
Posts
-
Re: tricity bendix biw105w 5 flashes.
Thanks for reply. I havr since fitted a known hood motor and also disconnected motor.
So still a head scratcher!Re: h/p wt960
thanks for this post guys. its confirmed my diagnosis on one of these yesterday. hope we can discover if its an easy component fix soon.
Re: Indesit WD 12X
thinking out of the box. id establish that they’ve got the hoses on the right way round, assuming that its hot and cold fill.
Re: Can anyone solve this, Hpt Dish
i cant remember which lights they were but on a similar dishy over a year ago i replaced the fill matrix/hamster wheel assembly for about £17. all i can remember is that it wasn’t filling to correct level.
hope this helps in some way.Re: Diplomat ADP8342
book says sensor failure. but it only shows in test mode. personally id assume the customer isnt counting it properly. ive never seen ten flashes, even in test mode.
Re: WHIRLPOOL 3LSR6233EQ1 DRUM SEIZED.
it was the three piece coupling. thank you very much guys. its really appreciated. also very simple job.
keithRe: Bosch WAE28162
yes brushes. also check the motor overload for continuity before you put it all back together.
Re: smeg dishwasher
usually circuit board. have a go at soldering in a new capacitor. its usually the blue one about 1.1mf. ive had 50/50 sucess rate. otherwise the boards are ridiculous price.
Re: LG dishwasher OE error code
Ignore my post. Had a thicko moment there as I read it as washer not dishwasher.
Re: Beko Lamona Dishwasher HJA8362 – No heat
an after thought. what about the poor quality of bosch boards, hence the recall and the dozens of them that ive had my soldering iron to.
anyway lets just agree to disagree.Re: Beko Lamona Dishwasher HJA8362 – No heat
look at what you get when buying computer parts. because they have to be compatable the competition is there and this drives the price down. white goods parts are expensive purely because the brand owner wants them to be. i dont think that at component level the quality is any better.
i say well done beko for fair pricing, and to be honest hoover dishwasher mods are reasonable as well at around £35.Re: Beko Lamona Dishwasher HJA8362 – No heat
i work on tons of dishwashers and have found the Bekos to be ok. I’d have one before most of the other crap. when you say you get what you pay for, i think thats how much pcb should be or maybe a bit more, not the ludicrously overpriced parts for say Smeg where you definately DO NOT get what you pay for.
keithRe: BOSCH WAE 24164
hi colin
i’ll have a dig about cos i might have a board that’ll fit your machine. i’ll give you a ring thursday.
keithp.s do you know alans on here now. alanmstorey
