[Lawrence]

Re: Brandt Dishwasher Leaking

I’m with Mark one of the spray arms will have a split in the plastic weld you won’t see it but if you run a blade down it that usually helps to diagnose .
Lawrence

[Lawrence]

Re: City Centre call? – no way Jose’

I once did a smeg dishwasher at Sizewell B ,they wanted all my info 48 hrs before I called and it still took me 2 hrs to get on site ,and it was the stat needed resetting ..result
Lawrence

[Lawrence]

Re: City Centre call? – no way Jose’

Horses for courses I suppose ,I am picking up more and more agency work ,seems like you do a good job for one and when they talk to each other your name gets passed around .
I have done hairdressers ,and offices in pedestrianised areas ,I always get them to e-mail me a works order with a pre determined BER limit so there is very little hassle with quoting etc,park as near as poss add the cost of the ticket to the bill and and my labour starts from the moment I leave the van so they pay for me to walk there and back.I also carry a small tool wallet with the basics in for fault finding ,saves me lugging the full toolbox .
Lawrence

[Lawrence]

Re: Scrap & Weee

tanner wrote:if you are caught on the wrong side of the law on this i was told by said copper that it could cost me THIRTY Grand.rgds stuart

This is why I have a waste carriers licence and dispose of old machines at an authorised scrap facility,and always get paperwork to prove what I have diposed of ,I also leave as many old parts with the customers as possible .
Lawrence

[Lawrence]

Re: Admiral LATA400AGE motor and pulley

JLA 01422822282 and no it isn’t
Lawrence

[Lawrence]

Re: Scrap & Weee

if you transport old appliances,used spares,customers machines to workshop and back ,you have to have a waste carriers licence.
Lawrence

[Lawrence]

Re: Whirlpool OWI failure

Cheers Bob ,anyone know the part no ?
Lawrence

[Lawrence]

Re: Miele T/Dryer T5206

Anyone got one ?
Lawrence

[Lawrence]

Re: COP and OFT updates.

I am half way through but have a stinking cold so am making slow progress ,there is a typo under workmaship/service call line 5 I assume it should say in a safe condition it says is a safe condition .
so far Ade I think it is an outstanding piece of work .
Lawrence

[Lawrence]

Re: Costs to become Corgi Registered????

Hi Rob
You realise you have opened a can of worms don’t you ……
Firstly what experience and qualifications do you have with regard to Gas
Current or lapsed .
These have a bearing on what you will have to do and how much you will have to spend .
Lawrence

[Lawrence]

Re: Scrap & Weee

I take scrap appliances to my local scrap dealer 5 machines = on average £35-£40.
I always get a weighbridge ticket and write on how many machines were scrapped ,I also put all the tickets through the books ,so everything is legit .
Lawrence

[Lawrence]

Re: dual fuel dilemma

washdoctor wrote:
If we have, in writing from corgi that it is permitted to work on the electrical side of a duel fuel, that’s all we would do is post it and let each repairer make up their own mind!
Adrian

I think that is all that we can do ,state the facts as given to us by the regulatory body.
Then people have to make their own mind up .
Lawrence

[Lawrence]

Re: Smeg job sheets

We asked why they have been changed and were told it was at one of the directors request .
Lawrence

[Lawrence]

Re: dual fuel dilemma

washdoctor wrote:

Lawrence wrote:
Depends if Ade can blood out of a stone 😆
Lawrence

Time for the bear prodding stick to come out! 😆

😆 😆

[Lawrence]

Re: dual fuel dilemma

Depends if Ade can blood out of a stone 😆
Lawrence

[Author]

Posts