Forum Replies Created
-
AuthorPosts
-
loopey
ParticipantRe: Bosch sms9022GB/014
pcb has gone had the same fault this week , take a look at pcb there is a row of triacs 2 nd 1 up will have blown away ..
phil
loopey
ParticipantRe: candy cmd146 wires off pressure switch
see iff this helps ๐
Mod edit.
Glad it helped, now removed. ๐
iadom
loopey
ParticipantRe: 3 phase motor thermocouples?
well yes and no .. the toc is strapped to the back end of the coil and can be changed , but the motor is riveted together ,i have never sucseeded to get one to bolt back together again , or run correctly , the stator allways stalls against the field coil ๐
phil
loopey
Participantloopey
ParticipantRe: Candy DSI 795XF parts diagram for control panel
soz 41004493 try that lol to many beers ๐
loopey
ParticipantRe: Candy DSI 795XF parts diagram for control panel
21 is 41005585
10 is 41004446
10a cover for handle 41000012 iff neededphil ๐
loopey
Participantloopey
ParticipantRe: Lok Ring
kwatt wrote:Why would you? Just tell me why?
I hate them, I hate them, I hate them and, by the way, I hate them!
Lokring is a spiteful hateful blight on the planet so far as servicing goes IMO.
They are expensive, unreliable, prone to leaking, hard to fit in confined quarters and just generally a pain in the backside. The only time that I have ever seen the need to actually use the damn things, or something similar, was replacing an aluminium evaporator which went to copper because, simply, you can’t braze that.
If you want a reliable joint that doesn’t leak, braze it.
For the cost of all the gubbins you need to can easily buy a good scorpion head and do a much better job, neater and with (I reckon) about an 80{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} better chance of never getting a recall.
After that the cost of flux and rods is WAY, WAY, WAY lower than rings that don’t work. ๐
K.
Most agreed with that i hate lock ring with a passion ๐
loopey
ParticipantRe: Lok Ring
HRP Ltdรขโฌลฝ –
5 Rivington Ct, Hardwick Grange, Woolston, Warrington, Cheshire, WA1 4RTรขโฌลฝ – 01925 837688รขโฌลฝdont bother with lockring its aloud of crxxp ๐
loopey
ParticipantRe: Hoover SE220 wont spin
megger the heater , low insulation can cause this to
phil
loopey
ParticipantRe: zanussi zsf2400 dishwasher fault
lo mate its the stats on on the left hand side of the dishwasher i have the part you need when you come down ? its the over heat stat o/c
philloopey
ParticipantRe: Hoover HFA 27k
nothing found on gias site ๐ so i rang the techey guy he said both jumpers should be on , and or check against old pcb ? all so check toc in freezer iff o/c it wont do a defrost and throw up a fault code i/e flashing green and orange lights on front panel : hope this helps
phil
loopey
ParticipantRe: Hoover HFA 27k
give me the product number will have a look in the advance search option ๐ see iff owt pops up
loopey
Participantloopey
ParticipantRe: siemans fridge freezer kg31v20gb/03 not frost free
looking at the board its numbed from the top 4321 link 3 and 1 on the pcb as described above ๐
phil
-
AuthorPosts






