Forum Replies Created
-
AuthorPosts
-
maltheviking
ParticipantRe: Hotpoint WD640G Dryer fan/box
Thanks Rob that was the road I was looking down 😀 Now just have to break it to the customer how much it is 😳
maltheviking
ParticipantRe: Hotpoint WF541
Boards on these are a bit of a PITA Send it off to EMW for test/repair if you don’t wan’t to buy a board.
maltheviking
ParticipantRe: Hotpoint WF541
Pumps are 240v so your 180v supply is at question
maltheviking
ParticipantRe: Whit Knight cl311/1w
Sorry mate gave you duff info, part no I gave is for a different dryer.
BTW 4819****** =Whirpool, they are on shop@but under an Elux.number
Iv’e had a look for what you are after, it seems that the part is obsolite. connect are showing an alternative, 5031681094724maltheviking
ParticipantRe: Whit Knight cl311/1w
Is this what you are looking for? 481928248046
maltheviking
ParticipantRe: AEG L14710 914 601 224.01
Check your email 😉
maltheviking
ParticipantRe: Come back for pussie!
Oldtog wrote:What a nice man, a very nice man
Nah you should have tapped it on the head Viking style, bloody cats, not that I biased against them :innocent:
maltheviking
ParticipantRe: Aqualtis AQGMD149UK
As usual, your a star Jim 😉
maltheviking
ParticipantRe: Aqualtis AQGMD149UK
It was down to the thermistor which I had checked 😳 F13 =NTC 90{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of the time. When the machine was on was for a while, steam/moisture has been getting past the “o” ring seal around the NTC (o ring was damaged)onto it’s terminals.
Anyone got the part no. for the NTC please
maltheviking
ParticipantRe: Aqualtis AQGMD149UK
Bob you have a PM 😉
maltheviking
ParticipantRe: FDW60
loopey wrote:had one of these yesterday with the same fault code , its not the pcb ,
it was water in the pressure switch pipe the one on the right that controls
the heater . had me baffled for a couple of hours lol after new pcb fitted ..hth philThanks for that Phil but I had already checked the pressure sw and pipe along with everything else. 😕
maltheviking
ParticipantRe: ZWF 1632W
Just got it Martin many thanks 😉 I know what I will be reading in bed tonight :rolls:
Managed to find the problem, usual faulty door lock, shorted and stuffed the main board. Ahhh the pleasures of modern rubbish
maltheviking
ParticipantRe: What charge for entertainment?
robbra wrote:Tell me Mal, what tips would you have suggested I use for one customer I had this morning who spent the whole time sniffing then clearing his throat as he read the paper beside me?
I would have told him to get out of the toilet as you liked your privacy :rotl:
maltheviking
ParticipantRe: What charge for entertainment?
Treat one of my customers to a packet of “Polo’s'”
Poor bugger isn’t the sharpest arrows in the quiver (Care in the comunity )” and stands over me every time I work for him, he has the remains of his last meal on his chin and breath to match.
I am sure he just calls me for the free polos :rolls:maltheviking
ParticipantRe: Ariston slimline LSI 45/50 drain pump
You will have to see it in the flesh, take one of each pump with you
-
AuthorPosts
