Forum Replies Created
-
Posts
-
Re: Bosch exxcel 1400 express
Goatboy wrote:I looked in the mirror the other day, and realised I look like Beaker! 😕
How do you get it to stick up like that…wax or axle grease?
Re: Bosch exxcel 1400 express
bongle wrote:Hope this is the right one? thanks x
Yes thanks, it indicates to me that as your machine does not have a flow sensor, your problem is water pressure (pretty sure)!
Now I would suggest you check the water inlet valve filter (remove cold hose to access) as the fine mesh may be silted up?
As your machine is under 2 years old it is still under warranty and you could get Bosch in to take a look, though I doubt there isn’t any fault with the dispenser or valve though?
bongle wrote: i havnt got the instruction book either sorry i threw it.
Oh dear! Its a vital reference book for users when things go wrong and stuff 😥
Re: Slogan?
Would this be OK?
Re: Ariston AS150
bert_blagger wrote:Any ideas how much this would cost, ie part(s) plus time.
Several variables here on this one, difficult to know. Labour charges from and independent engineer (see link below) are around half that of Ariston though 🙂
bert_blagger wrote:I’ve read somewhere that these have 5 year warranty?
I hope that you read it on the paperwork you got with the appliance then?
bert_blagger wrote:Does this mean I just pay for engineer call out fee (£90) and parts are inclusive?
Yes that’s the way it works if you have that all important 5year Warranty!
bert_blagger wrote:Presume its something I can’t fix myself?
Probably not, best leave it to us experts eh 😉
Re: Bosch WFT2800 Wets Clothes as it “Dries”!
John,
This is an odd fault I must admit 😉 Now almost always the fault you describe is due to pump failure, what is odd is that on the dryer ‘service wash 7’ the pump appears to drain out OK?…very strange.
Now as you may know during the drying cycle a trickle of water flows through the condenser. All the while the dryer operates water flows through that condenser, the pump should be running and you should observe a trickle of water coming out of the drain pipe?
I guess that is not happening in your case and possibly the pump is not running for some reason? Which brings me back to my first point about a likely worn out pump (it should be by now as its old enough!)
Hope that helps?
Re: Dishwasher fault – HELP
The ‘Flood Protection’ switch has activated and as a result only the drain pump will operate. The baseplate will have water in it due to an internal leak. Turn off the power first, then tip the appliance slightly backwards (only backwards!) and see if any water comes out of the base?
Re: Bosch exxcel 1400 express
bongle wrote:Ive used to ariel ones and they are still all stuck in the drawer!!!!
I’m very puzzled by this 😕
I wish you would let us have the model number of your machine(Enr number) as I would love to solve this problem for you 🙂
Re: Hotpoint Web site
maltheviking wrote:Maybe I am asking the wrong questions!!!!!
Arr! That’s where you were going wrong Mal as they are all OUT of answers!
Re: Zanussi ZDQ595
pooh wrote:The problem seems to me to be that the hot humid air does not vent to atmosphere…although the internal oven fan is fine (motor replaced) and the vent fan system is fine
Are you sure the fan is working? If the fan wasn’t then the oven cavity would indeed turn into a steamer, contents would take twice as long to cook and would never ‘brown’ 😕
