Forum Replies Created
-
Posts
-
Re: Hotpoint WD63P
Bryan,
I think the WD63P only had a FHP motor anyway, so 1601888 should be what you require 😉
Re: Zanussi Carbon Brushes
fennyapps wrote:ZWF1221 definitley has this type of carbon brush fitted.
No such model listed :con:
ZWF1220 and ZWF1210 is all can find????
kwatt wrote:They’re pretty bog standard just asking if the research co. can call the customer
Ah! That’s what I figured and I have several copies of the market research form in question as it happens.
Far better would it be for that same market research company to produce a questionaire (in postcard form) for customers to fill in and post 💡
For them to telephone my customer and question them for “about 10 minutes of your (their) time” is not the best way to get a response and I personally would not wish that on myself let alone my customer. 🙁
Therefore the pre-paid postcard the better answer (and a darn site cheaper for the research company too – with a better guaranteed response percentage I reckon)
Forget the before & after video idea reference by the way (for now at least 😉 )
Re: Zanussi Carbon Brushes
Welcome to the site 🙂
What model Zanussi do you refer to, as most brush terminals either exit to the side (l or r) or below?
Re: Soap Powders & Technology Training
kwatt wrote:give me a shout and I’ll get you some snazzy forms sent
Ken, could those forms be based on the ‘before & after’ video that was presented so well at the last UKW meeting on that subject?
Re: Indesit W1035WG blows trip
Mike,
I think you may have answered your own question here 😉
leavemetogetonwithit wrote: I did not have my megger with me
Take that along with you next week and you’ll soon suss it out 🙂
Re: bosch wfk 2800
tonyclifton wrote:carbons which are ok when it finishes pumpin out it bleeps and flashes up no 4 on it any ideas
Yes Tony :tup:
It likely is the brushes mate, or at least associated with trouble in that area 😉
Change the brushes (ensure they slide freely in their holders by the way). Megger and check continuity of the motor and the motor plug leads. That should sort it hopefully?
Re: PUBLIC LIABILITY INS QUOTES
Phidom wrote:On balance I value the freedom to run my business my own way and therefore do not feel ready to sign the UKW Charter.
Whilst you may have misunderstood the part about scrap parts (or possibly are reading an earlier version), I value and respect your sentiments as to how you run your business, and that’s fine 🙂
However, as Dave pointed out the need for you to consider increasing your Public Liability cover. I must add that reading throughout the clauses within the UKW Members Charter, there is nothing within them that would not be implemented by any business as a matter of course anyway. It represents nothing other than acceptable guidelines for trade members to be willing to accept in order they may be allowed access to the lucritive extra business Repairs@ will give 😀
Can’t be a bad idea to reconsider 😉
Re: PUBLIC LIABILITY INS QUOTES
Phidom wrote:but it looks like the concensus is that I should have £2 million?
To be part of repairs@ you must have £2million cover anyway! 😉
Re: PUBLIC LIABILITY INS QUOTES
cooky wrote:I have just saved over £400.00 on my liability insurances.Deceided to go with assure uk
Result !!! :tup:
Re: mutlimeters/tester
umed,
Try these guys for top quailty stuff, incidentally, what are you using at the moment I wonder?
Re: Safety Issue on Hotpoint Dishwashers
bobokines wrote:I went to one today (Indesit D61UK)
That model does in fact have 2 black plastic covers that have to be removed before accessing that area anyway, but I get your point about the doorswitch isolation. 😉
We will have to wait and see what transpires on this issue. All I can say is that at this stage Peterborough Trading Standards Officers will have by now knocked on Indesits door and asked certain pertinent questions over the matter.
Watch this space 😀
Re: WMA 10 /11/13 missing from Partfinder?
Dave_Conway wrote:Too tidy for my own good 😳
Mind-set thoughts required here Dave :lesson:
There may be some unfortunate soul out there that can use this information if only you had kept it? OK, so it was only iadom in this case but that’s not the point 😉
:rotl:
P.S. Only joking Jim…OK??
