Forum Replies Created
-
Posts
-
Re: WMA 10 /11/13 missing from Partfinder?
iadom wrote:Well that was quite painless, updated in less than a minute. 😀
Oh how we love the speed and cooperation the Indesit Company give us when they realise THEIR customers might NOT be able to find the parts we require to BUY from them using PARTFINDER 👿
Re: WMA 10 /11/13 missing from Partfinder?
Dave_Conway wrote:and I chucked the leaflet
What is he like eh? 🙄
If you cannot see those missing models? Then do the following:-
Go to http://www.jvfpartfinder.co.uk/issuefive/modelfix and follow the instructions for downloading and installing the automatic fix 😀
Re: Hoover Drum Paddle Problem
MickGeorge,
Give us the 8 digit product number of this machine ( label on the back beginning with 3???????) that way we can ensure the right version 😉
John’s part number is open at one end and likely not the one you want?
Re: Bespoke ‘solid oak’ kitchen fitters !?!***?
Oldtog wrote:Plus VAT Martin
Bespoke engineers like me don’t make any bespoke VAT charges to our customers these days, Besides, I’m just a humble bespoke old git like you mate (How’s your luck anyway, long time no type?)
Re: BOSCH WTE 84107 & 86308 Tumble dryers
Both models are made in their German based factory by Germans and/or their ‘Gastarbeiter’ workforce. As far as I know their range of tumble dryers are not made in their Spanish factories (the Balay company) although they too are pretty good quality if they were 😉
Chalk = Creda and Cheese = Bosch, such is the comparison IMHO 🙂
Re: White Knight CL767 tumble dryer bottle full light remain
The Bottle switch mechanism could be jammed with crud. (located at the rear of the housing with lid off!)
DISCONNECT FROM MAINS BEFORE LOOKING! :zap:
Re: Bosch WFF2001GB/01 Heavy duty doorseal
Simon46 wrote:Anyone heard of this?
News to me although GIAS has produced “anti-bacterial” resistant door door seals for Hoover and Candy machines a while back now.
Re: hotpoint tumble dryer design fault
Johno,
You have already asked this same question (yesterday) and it has been answered my friend. Do please try to contain one question to one thread, thanks 😉
…and in the appropriated forum is best! 😀
Re: Trade Access
Trade access?
This guy is a venerable comedian wanting just that, and reading his past posts I wonder what trade he is actually trying to access…and WHY????
Re: How is it a lot of posts are appearing an hour before th
The clocks don’t go back in Cornwall, the government took them all away years ago as no-one there could read them :rotfl:
(only joking by the way 😉 )
Re: Bosch Nightmare
As far as I recall Mark the motor plug wire connections coincide with their respective module terminal plug connections. (i.e 1 thru 6 on each plug wired the same) 😉
A simple continuity meter check on each wire to confirm you have them in the same order :tup:
Re: Detergent Door Fails to Open on Bosch Dishwasher
Shaun,
My recommendation still stands, but if you insist on replacing the individual parts, then thats not a problem either 🙂
Just click on this link and make your choice: – http://kundendienst.consultens.de/gb/BS … e_Care.htm
Re: Hotpoint Slimline 7801 not emptying
No, as Simon46 was suspecting, your drain pump is jammed with something and needs stripping out and cleaning. No way is it a DIY job and I recommend you consult a local expert here : –
Repairs@Re: indesit wd12 problems
Simon,
Did you read the thread in this forum on “KNOWN ERROR CODES?”
http://www.ukwhitegoods.co.uk/modules.p … 40&start=0
8 flashes is a heating fault albeit a duff module, heater on NTC, best of luck mate 🙁
