Forum Replies Created
-
Posts
-
Re: hoover classica dryer dead……….please help!
mel,
Too many options that could give this same fault I’m afraid. Door Switch? Timer Control?On/Off Switch? :con:
There are several models in the Classica range also?
If you would like an engineer to check it out for you click here…
Martin
Re: What is the most useful tool in your toolbox?
I use one of these continuity testers and have done for years now, they are brilliant…..and cheap to buy……!!
Martin
Re: White Knight Condenser Dryer Not Heating
Xkutzie wrote: Does it require much force to press it back in?
No, but if the red button is a rubber grommet inset in the rear panel it will need a firm press in its centre.
Martin
Re: White Knight Condenser Dryer Not Heating
Have you firmly depressed the red button then tried it again I wonder?
Martin
Re: Repairs@
kwatt wrote:I still think it’s crazy though, it’s like me telling people to roll up and collect their free money and then they just walk on by, Crazy!
Martin
Re: Repairs@
Ken,
Patience my boy :lesson:
I know you’re straining against the leash a bit on this one but as John says, once the holes in the coverage areas are filled it will be a totally different story 😉
We are promoting it like crazy right now as you know, and Joe Public is reacting very well indeed and possibly beyond what you ever imagined at this moment in time. If those trade members out there that don’t sign up then sod ’em!
But having said that, if you do know of any specific Postcode area that does have a trade member and yet he hasn’t signed up it might be an idea to post in the “Repairs@” thread a headline something like “Work in BM goes begging!” to see if you get a response?
Martin
Re: Repairs@ Module
That sounds about right as a good number of ‘potentials’ come back on the forums saying no-one listed in their Postcode area 🙁
Martin
Re: Changing the interior light in a AEG Dishwasher.
Shades of….“how many service engineers does it take to change a light bulb?”.…spring to mind here 🙄
Martin
Re: Choosing an American side-by-side Fridge Freezer
kwatt wrote:Personally I’d go for the Maytag as they have proved pretty robust in my experience of them.
I would go along with that sentiment, but add that ADMIRAL is another brand name used by the Maytag Corp, so it’s the same product 😉
Martin
Re: Help please!
tattoohunter wrote: Is it possible to get a new drawer front for it?
Yes!….but not without the model number as there are hundreds of different Omega 1100’s 😥
Martin
Re: ariston dishwasher AFA 350
funkyboogy wrote:remember the door swings both ways….dyson manuals,fault codes…ring any bells…diplomat E2 ?…
U GUYS CRACK ME UPfunkyboogy,
We are indepted to you sir for your frank and open appraisal of your present employer, British Gas. Thanks also must go to you for your help regarding certain technical publications we may have since acquired through your generosity. :tup:
Indeed should I have been fortunate enough to have had the technical back-up from The Indesit Company at my disposal, I may well have been able to share that knowledge with you and help in the matter of the errant Ariston in question! Sadly that is not the case and I suspect the problem will have to be dealt with by yourself in the way that we in the independant service trade are faced with at this present time, namely by taking a calculated guess at the conundrum 🙁
Do please also take heed my respected colleagues here on UKW who have taken the time and replied so eloquently in their many postings in the fervent hope you may take to heart their sincere advice.
May I conclude by wishing you and your British Gas colleague Arch every success in the future, ( by the way,I hope British Gas didn’t manage to spot your email addresses lest there be any repercussions 😉 ) for you as a Trade Member it is hoped you will continue to enjoy the many and varied facets this website can provide, it’s such a shame we could not help you in this instant 🙁
Martin
Re: Bosch SGV56A03 not finishing cycle
Simon C
Pay particular attention to Gegsy’s post about the hose from the meter tank to the sump….that will solve your problem 😉
Martin
