Forum Replies Created
-
Posts
-
Re: spares
stratfordgirl wrote:I think it depends on your customer base.
Sounds like a posh area you’re in then and no mistake. Spares prices are a lottery for most of us and ordering non stocked spares for your customer can often cause upset as previously mentioned. But ultimately your price is your price and if you are happy with it then that’s all that matters. If your customer doesn’t like it, point them to the exit.
Re: bosch dishwasher
Have you checked the aqua stop valve?
Is the heat exchanger matrix not filling within 60 seconds or so? Have you checked the outlet valve alongside the salt valve? And no it doesn’t have an Impeller Jug so I don’t know what parts search you are looking at but it’s probably not the BSH one.Re: 20 FEBUARY 2015 Coventry meeting
kwatt wrote:Now, there’s a lot to take in there and I get that as it’s a ton of info hugely condensed.
You never mentioned the Chinese once in your lecture and that 5{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} profit margin statistic alone will give them ample opportunity for world domination. Is there a rep from Haier or Little Swan coming to the meeting next month?
Re: Interested in returning to this trade
lee8 wrote:Huge generalisation but I’ve had 5 beers.
Depression of lee8 once more soothed by plenty of alcohol.
Re: oven switch selector sparks and blow consumer unit fuse?
Stating the obvious I would think my friend. To be more specific perhaps you could enlighten us with the make and the all important model number.
Re: Smeg SCP495X-8 Electric Oven light blew, now no heat.
No simple pointers we can give on this. Oven lamps blowing main control boards are commonplace with various makes including Smeg. Selector switches can also have fused (burnt out) contacts when the lamp or heating elements blow. I fear another costly fix is coming your way. 🙁
Re: Hoovermatic Twin Tub Washer. Advice on Repair Costs Ple
ravindave wrote:If you fancy having a go at repairing your own machine, and want a little advice,
Bypassed safety devices and bodging switches doesn’t sound like good advice to me Dave. I would venture to suggest the moderators delete your email address for safeties sake alone! 🙁
Re: Siemens WT34V397GB/04 Clean filter fault
Kennyboy100 wrote:Could
it be a faulty sensor SKU: 154166. If so is this the correct one for our
dryer?Yes and yes. 😀
Re: Bosch Exxcel WVT1260GB/01 – stuck on 1 minute – heater i
osc wrote:Is there somewhere I can get the board repaired, or a replacement?
The board cannot be sent away for repair to anyone. And a new one Shown HERE is a tad costly.
Re: bosch wta4107gb/01
From the back. A very simple fix with easy access but beware sharp stainless edges. New elements prone to earth leakage. After replacing the element it is best to remove the earth wire on terminal block and run dryer for 5 mins before reconnecting.
Re: Bosch Tumble dryer WTV74105GB/12.
Alanj wrote:If you touch the start button it’ll start and run again.
Was thinking maybe the door switch might be faulty? Any thoughts?If all it takes is to press the start button and NOT the door then I wouldn’t suspect the door switch.
Re: neff slim d/w overfilling
hilly wrote:ive changed the valve on the side of the salt pot but no joy.
Then it sounds to me you’ve changed the wrong valve. The ‘outlet valve’ (00166874) needs changing and that is the one on the right of the ‘salt valve’.
