Forum Replies Created
-
Posts
-
Re: Gorenje wa60125 carbons
You should post questions like this in Trade Spares, but anyway, some like THESE maybe?
Re: Bosch wvd24460gb/02. Fd 9103 00508
Don’t you just love this Smeg built tosh?
Possibly a crudded up air chamber causing pressure switch stuck on anti-flood?
No lights showing on the LCD are there?Re: Bosch SMS69L22
It relates to a main circuit board fault. So not cheap which ever way you look at it. 🙁
Re: Candy domestic microwave
PlanB wrote:but I may need a timer control pot.
There’s 2 different timer modules on these depending on the product number date code but what is a “control pot” anyway?
Re: Siemens SE25M570GB/17 Dishwasher stops
No, time out for anything. Usually no heat, fill probs and such. Time to roll up the sleeves and check it out. 😉
Re: Staining
Wow what a fascinating thread! One Aqualtis washer, liquid detergent used (Ariel I think?) 5 – 7 loads a week and only white garments show up this random staining. Though I’m sure given the mix of weekly washing done then the staining must also be on the coloureds and simply not visually detectable.
Oddly, no mention of the bed sheets? Pure white, cotton fabric as a rule, everyone washes them weekly, never a mixed wash either, all sheets and nothing but. Yet in this case the OP has not complained of sheets being damaged in this way.
Just curious that’s all. 😉
Neff oven timer problem
The “relay” a surface component of the timer/clock unit. Good luck with that.
Re: zanussi zdc77570w
It’s fair to assume that if the controls are dead (no lights, no display) then a diagnostics test procedure is not possible. Power to it and the door interlock means it must be a board fault (main board). 🙁
Re: Indesit DIF04 fault. Cycle not starting no flashing ligh
No, sounds like the circulating pump has seized if it’s heating the water yet not circulating?
Re: Indesit DIF04 fault. Cycle not starting no flashing ligh
It is symptomatic of a break in the wiring harness between the inner and outer door.
Re: Siemens WM16S770DN gets stuck with 1 min left on the dis
Maybe it is not heating the water? Does the door glass get warm during the wash part of the cycle?
