msappliance

Forum Replies Created

Viewing 15 posts - 106 through 120 (of 208 total)
1 2 3 … 7 8 9 … 12 13 14
  • Author
    Posts
  • March 26, 2008 at 4:32 pm in reply to: Servis m9503w lights #246958
    msappliance
    Participant

    Re: Servis m9503w lights

    Thanks i will try them.

    February 7, 2008 at 7:52 pm in reply to: baumatic 1000w microwave #242426
    msappliance
    Participant

    Re: baumatic 1000w microwave

    thanks.

    February 6, 2008 at 9:00 pm in reply to: MIELE T430 no motor action #242368
    msappliance
    Participant

    Re: MIELE T430 no motor action

    i would normally say the electronic board.

    February 4, 2008 at 5:19 pm in reply to: samsung rl33bns f/f #240735
    msappliance
    Participant

    Re: samsung rl33bns f/f

    ok i managed to get back to appliance there is no ice build up and rubber has been already removed. when you switch appliance on the flap turns a few times, closes and then lights flash any more help please im getting desperate. sensor fault ?

    January 22, 2008 at 8:54 pm in reply to: servis m900 w/d #240730
    msappliance
    Participant

    Re: servis m900 w/d

    will try but why wouldnt it fill on some wash but will on others sounds stupid question but i thought it would just overfill on all or no fill at all.

    January 22, 2008 at 8:31 pm in reply to: servis m900 w/d #240728
    msappliance
    Participant

    Re: servis m900 w/d

    sorry do you mean blocked?

    January 22, 2008 at 8:04 pm in reply to: samsung rl33bns f/f #240734
    msappliance
    Participant

    Re: samsung rl33bns f/f

    thanks a lot

    January 17, 2008 at 8:04 pm in reply to: White knight 84aw dryer #239521
    msappliance
    Participant

    Re: White knight 84aw dryer

    thanks

    January 13, 2008 at 8:49 pm in reply to: Miele w5425 #239486
    msappliance
    Participant

    Re: Miele w5425

    2nd rinse light is carbon fault, have the 4 pins from carbon holder gone in ok as somtimes they miss and brushes have released from holder

    January 13, 2008 at 7:20 pm in reply to: Miele w5425 #239484
    msappliance
    Participant

    Re: Miele w5425

    Make sure brushes are released and in contact with armature, check moter block wires are not broken to motor and trace them back as these are common to break/

    January 4, 2008 at 12:29 pm in reply to: smeg ksed 95x hood #238456
    msappliance
    Participant

    Re: smeg ksed 95x hood

    Thanks.

    January 3, 2008 at 7:04 pm in reply to: whirlpool s20b-a/g fridge freezer #238454
    msappliance
    Participant

    Re: whirlpool s20b-a/g fridge freezer

    thanks will keep in touch

    January 3, 2008 at 6:48 pm in reply to: Error Code on Ariston A1636S washing machine #238430
    msappliance
    Participant

    Re: Error Code on Ariston A1636S washing machine

    Have you checked the drain filter, maybe blocked or pump faulty. try putting on drain only.
    Unplug b4 checking and make sure you drain off water 1st inside machine to avoid spillage.

    January 2, 2008 at 1:08 pm in reply to: Smeg WDI12C Not Drying #237870
    msappliance
    Participant

    Re: Smeg WDI12C Not Drying

    Possibly a water valve is faulty, unbplug apliance b4 checking

    November 15, 2007 at 4:49 pm in reply to: DIHR Tekno 600 dishwasher #233889
    msappliance
    Participant

    Re: DIHR Tekno 600 dishwasher

    is it 3 phase and one of the phases are down?.

  • Author
    Posts
Viewing 15 posts - 106 through 120 (of 208 total)
1 2 3 … 7 8 9 … 12 13 14