Muv

Forum Replies Created

Viewing 15 posts - 316 through 330 (of 647 total)
  • Author
    Posts
  • in reply to: miele w149 #391461
    Muv
    Participant

    Re: miele w149

    If the start light is flashing… It means either the inner lid of the drum is not closed properly,or if the lid is closed..then it’s the lid switch that needs replacing

    Martin

    in reply to: meile T234c #390225
    Muv
    Participant

    Re: meile T234c

    Glad to hear the outcome of this one..

    Martin

    in reply to: Hotpoint WD420 leaking from detergent drawer #391372
    Muv
    Participant

    Re: Hotpoint WD420 leaking from detergent drawer

    Have you checked the drain filter for blockages..it may be stopping the spin cycle as the water is not getting pumped out fast enough..

    Martin

    in reply to: Hoover optima wmh 168 d flashing door light #391318
    Muv
    Participant

    Re: Hoover optima wmh 168 d flashing door light

    Check the motor brushes, they probably need replacing

    Martin

    in reply to: Hoover HNF 7167 user manual #391317
    Muv
    Participant

    Re: Hoover HNF 7167 user manual

    Thanks for that..
    i did look on the hoover website, but couldnt find it!

    Martin

    in reply to: Me feet are killing me!!!! #391278
    Muv
    Participant

    Re: Me feet are killing me!!!!

    Yep..trainers here as well…although in some homes i do take them off for the walk to the machine, then put them back on..only on clean sock days though..!

    in reply to: Dyson DC21 #391019
    Muv
    Participant

    Re: Dyson DC21

    Good video on you tube also..under dyson dc21 brushead ..

    Martin

    in reply to: Dyson DC21 #391018
    Muv
    Participant

    Re: Dyson DC21

    These dysons usually have a reset switch at the side of the brush head, depending on when jt was manufactured.. If it doesent, check for 230v DC at the socket.. If you have power its usually the motor thats knackered… Havent worked on a DC21 forma long time..but its a common fault with the uprights DC24 and 25..

    Martin

    in reply to: Miele W827 washing machine #390506
    Muv
    Participant

    Re: Miele W827 washing machine

    Good old south Wales !

    in reply to: washing machine speed #389154
    Muv
    Participant

    Re: washing machine speed

    That very thought did cross my mind!

    in reply to: Miele W827 washing machine #390504
    Muv
    Participant

    Re: Miele W827 washing machine

    If you want me to do it for you (trade price) PM me..

    Martin

    in reply to: Miele W827 washing machine #390503
    Muv
    Participant

    Re: Miele W827 washing machine

    These machines swing open from the left to the right, and the board you need to take off is the one facing you, through which the black rubber pressure switch pipe goes through on the left hand side…

    You need to replace the top left hand relay, and also the round cylindrical fuse….
    I have done around 20 of these in the last few months and never had a problem..

    Martin

    in reply to: washing machine speed #389148
    Muv
    Participant

    Re: washing machine speed

    iPhones are fitted with accelerometers by the way

    Martin

    in reply to: washing machine speed #389147
    Muv
    Participant

    Re: washing machine speed

    Good points raised there gents ..

    All I know is

    I tried it on speeds from 800 up to 1600 in 200rpm increments..and it was more or less showing the machines set speed..

    But for 69p you can’t complain!

    in reply to: washing machine speed #389141
    Muv
    Participant

    Re: washing machine speed

    Thought that YouTube video was a wind up, but duly did a search for it on the app store ..it’s there for 69p…

    The question you’re all asking is “does it work though”?

    Yes it does, and pretty accurately..

    Martin

Viewing 15 posts - 316 through 330 (of 647 total)