Forum Replies Created
-
Posts
-
Re: Hotpoint WDD960
Has this same problem a few months back, I fitted a replacement motor,but still had same fault..finally put another motor in and it ran fine… Only difference in the two motors was one extra red lead on the motor plug..although both were new replacements made for that model !
Let us know if you solved the problem
Martin
Re: Bosch dishwasher. Model number?
Mistake made in opening post…it’s the drain pump that was leaking!
Anyway went there this morning, fitted new pump.I was expecting a nice tight seal when I twisted the new pump on, but it was no different to the old one that came off, and as expected machine still leaks..
Can’t see any reason for the leak, although when feeling around the plastic tube that the pump rubber seal presses up against, there seems to be a small opening about a quarter of an inch, but I would say that this is the way it’s made, as there are no rough edges as there would be if a piece had broken off…
Anyone had similar problems…?
Have now deemed machine BER , as the heater was also defective..and customer has said she will get a new machine
Martin
Re: H/Point VTD00 T/Drier – vibration after drum shaft kit f
When I replace the seal/bearings on these I always use genuine hotpoint kits.. As I always have had similar problems with pattern kits..
Sometimes it helps to fit extra washers to the shaft on the inside of the dryer, as this helps push the drum further on to the front felt bearings. I find if the drum doesn’t quite fit on the felts correctly it will wear the plastic bearing runners away in no time at all..
But as you are more than likely already aware, these machines never seem to go back together, exactly the way they were before dismantling
Re: Bosch dishwasher. Model number?
For those who need it, It’s a SGS43T72GB/06.
Martin
By the way.., where do you get the emoticons from? I am using tapatalk on the iPad
Re: Bosch dishwasher. Model number?
Ok thanks..did look for etching around inner door, but couldn’t see.
Going back in morning to take machine in to workshop for better lookThanks
Re: Maytag MWA09149WH/1 washing machine stuck in demo mode.
Maybe if you switch it off at the mains socket for 5 or 10 mins that may clear it?
Martin
Re: Maytag MWA09149WH/1 washing machine stuck in demo mode.
Can’t seem to find that model number, can you check it please.. If you have the owners manual, what you need should be in there.
Martin
Re: What was the best machine ?
Seems like Sunday, was the only day people washed clothes back then!
Mod edit:
The image link was dead, do you want to try it again?
Don
Re: What was the best machine ?
Ahh yes the old keymatic.. First machine I ever remember seeing my mum use, followed by a hotpoint twin tub… Sunday washing took about 4 hours in that thing..the days when stuff was boiled..shame we couldn’t throw the spuds in as we’ll!
Muv
Re: Servis M9503W washer-dryer dead
Do you have any power light illuminated at all on the machine?
If not I’d check continuity down to the interlock. If that’s ok then you probably have a fault in the main power board. Or maybe a loose connection there…. Time to call a qualified engineer then!Sorry I cannot go in to further detail with this..
Martin
