Forum Replies Created
-
AuthorPosts
-
Penguin45
ParticipantRe: Zanussi Jetstream 1600
No drain in time allowed. Filter badly blocked (common), pump failure (fairly common), drain hose nipped/trapped (it happens), possible electronics problem (unusual).
Model number required if in-depth analysis required.
Power off if you find you need to go inside.
Regards,
Penguin45.Penguin45
ParticipantRe: Fridge Freezer Cold Location
Flyman wrote:What I was after is something in black and white from a recognised body which can be given to the customer.
Sounds like something to be cooked up by one of our fridge wonks for the Downloads and Articles section. Make it look tidy etc, should do the trick. Any takers?
Chris.
Penguin45
ParticipantRe: Bosch WFF2000GB Not Spinning
Have you used your test meter to check for continuity across the armature? They can stick in the brass holders if not cleaned of old carbon dust.
Power off please.
Regards,
Penguin45.Penguin45
ParticipantRe: Diplomat 8132 fill problem
Check this:
http://www.ukwhitegoods.co.uk/modules.p … light=8132Penguin45.
Penguin45
ParticipantRe: Repairs@ Forum?
I don’t know how to make a link……… 🙁
Chris.
Penguin45
ParticipantRe: Check the description
Nay lad – t’inflections not reet. 😀
Chris.
Penguin45
ParticipantRe: siphon mystery
I think it points at an NTC failure – this is the temperature sensor. Awkward one to try and solve – pro help?
Check Repairs@ or Directories for a UKW repairer in your area.
Power off if you are invesigating furher.Regards,
Penguin45.November 25, 2005 at 12:58 am in reply to: Help required with a hotpoint Electronic 800 De luxe 9526 #154121Penguin45
ParticipantRe: Help required with a hotpoint Electronic 800 De luxe 952
leavemetogetonwithit wrote:
By the way, I noticed an error in all the advice so far given here.
No one has exhorted POWER OFF! 😯 ❗Good spot LMTGOWI – all trade posters are reminded that “Safety First” is the crucial message to all posts on the site.
Regards,
Penguin45.Penguin45
ParticipantRe: BOSCH WVF2000GB/16 Interlock problem
With the power off……………
Penguin45.
Penguin45
ParticipantRe: WMA bearing change
leavemetogetonwithit wrote:
Not sure what I’ll do if any of them outlast the 5 years and I’m asked to do one.Personally, we just say “No”.
1) I haven’t got time
2) I would have to guarantee it.
3) The rest of it’s rubbish as well and I don’t want to end up on christian name terms with my customers.After we say “No” Julia says “Would you like to buy a Bosch?”
And from February we can say “ISE?”I think that it’s really the most humane course of action.
Chris.
Penguin45
ParticipantRe: Dish washer Siemens SE4237/37
SE24237/37 Dragan? You can find exploded diagrams and parts listings on http://www.bshappliancecare.com – follow links into Partfinder. Personally if you get 3kohms+ across the valve solenoid coil, I’d suspect he computer board.
Regards,
Chris.November 24, 2005 at 8:51 pm in reply to: Bosch SMS9022GB/11 Dishwasher timer clicking continuously #155447Penguin45
ParticipantRe: Bosch SMS9022GB/11 Dishwasher timer clicking continuousl
Switchbank causes lots of fun………
Chris.
Penguin45
ParticipantRe: Where have they gone?
Sorry about the block of posts this morning – there were a couple I couldn’t work out so sent for Kiwi (Ross). He appears to have enjoyed himself!
And yes, it is interesting – most of these are logic problems as there is little commonality with our familiar front loaders.
Chris.
Penguin45
ParticipantRe: Candy CNW156 W/D
Thanks Dave.
Chris.Penguin45
ParticipantRe: Fisher & Paykel GW709au
Binary code right to left – 1+2+8+32 = 43.
Penguin45.
-
AuthorPosts
