Forum Replies Created
-
AuthorPosts
-
Penguin45
ParticipantRe: Bosch SGS43A42GB/01
gegsy wrote:
Paper platesIn a dishwasher? You tight git…….. 😀
Chris.
Penguin45
ParticipantRe: CRAZY
I’m that busy we are simply not accepting new customers at the present time.
Chris.
Penguin45
ParticipantRe: hotpoint DWF 33 suppressor explosion
They blow up with alarming frequency. If you want it quickly, order 165201 from http://www.bshappliancecare.com with your credit card and you’ll get it the following day. Your appliance is a licence built Bosch with a badge on the front, so shares components with it.
Regards,
Penguin45.Penguin45
ParticipantRe: Speed Control / Motor Control Module
Re: http://www.diynot.com/forums/viewtopic.php?t=35832
Hmmm – not a safety warning in sight anywhere……….
Penguin45.
Penguin45
ParticipantRe: Slugs in Dishwasher!!!
You could always take the filters out and run it………. That’d get rid of the blighters.
Penguin45.
Penguin45
ParticipantRe: Bosch button
Do you think he’ll get the message?
:wave: :wave:
Chris.
Penguin45
ParticipantRe: Bosch button
170695 – £2 list.
Chris.
Penguin45
ParticipantRe: Bosch SGS43A42GB/01
Er, plates don’t generally soak up water…….. 😀
Chris.
Penguin45
ParticipantRe: Siemens Siwamat 6140: Error code 4
An email to spares@ukwhitegoods.co.uk will magically produce the brushes for you.
Regards,
Penguin45.Penguin45
ParticipantRe: how good is this web site
Per Bonus.
Just to terrify Ken with the Latin thing…….
Chris.
Penguin45
ParticipantRe: An Age Thing.
Jim’ll kill you if fancy a game of squash….. advancing years or not. Oh, re the Stop button – it’s “Miller Time” when you get to our age, not Hammer Time. 😀
Chris.
Oh Yes – 46, 19 years in the business…..Penguin45
ParticipantPenguin45
ParticipantRe: Bosch not cleaning in top rack (rotor is clean!)
Simon, this machine cannot syphon due to the air break in the fill/drain matrix.
The problem will be either that the machine is underfilling – usually caused by a partial blockage of the transfer hose in the front left corner of the chassis – or that the circulation pump is failing in some way. I had one last week running on the start winding only, giving exactly the same symptons.
Either way, it’s a bit of a demolition job to sort out, so pro help may be your best option. Check repairs@ or Directories for a UKW repairer in your area.
Power off if you’re going inside.
Regards,
Penguin45.Penguin45
ParticipantRe: Ariston Margharita AWD 12S not draining water
When cleaning out the filter you need to get right into the rear chamber where the impellor is. Hands, knees and a torch. If this is clear and the impellor will turn freely with a “pinging” action, you probably have a failed pump.
http://www.ukwhitegoods.co.uk/modules.p … cts_id=392
should be the one you want.
If you’re not sure, check repairs@ or Directories for a UKW repairer in your area.
Power off if doing anything other than checking the filter.
Regards,
Penguin45.Penguin45
ParticipantRe: Water consumption – Ariston AV1247C
10 – 13 gallons was typical on these older machines. Also bear in mind that the dryer will use a pint a minute for the condenser when drying.
Regards,
Penguin45. -
AuthorPosts
