Penguin45

Forum Replies Created

Viewing 15 posts - 166 through 180 (of 19,678 total)
  • Author
    Posts
  • in reply to: zanussi zwf 12070 #312230
    Penguin45
    Participant

    Re: zanussi zwf 12070

    Ask that question in Trade Tech will you, Grazza?

    Penguin45.

    in reply to: Whirlpool american collection not cleaning #317764
    Penguin45
    Participant

    Re: Whirlpool american collection not cleaning

    Penguin45 wrote:THIS STUFF is pretty amazing.

    Yes / / / ……

    P45.

    in reply to: Siemens Extraklasse 1300 not drying #320421
    Penguin45
    Participant

    Re: Siemens Extraklasse 1300 not drying

    Enr number, please.

    Penguin45.

    in reply to: Bosch Dishwasher SGS43A42GB/01 #320315
    Penguin45
    Participant

    nomadPaul wrote:Take out the filters in the tub base . At approx the 5 o’clock position around the edge of thesump area you will see a small grey cover . Pop this off and remove the float from its tube.

    P45.

    in reply to: CANDY F/F MODEL CFMF236A #318770
    Penguin45
    Participant

    Re: CANDY F/F MODEL CFMF236A

    Hello loaf,

    Welcome to the mad house.

    Chris.

    in reply to: service M685W TEARING CLOTHS #320413
    Penguin45
    Participant

    Re: service M685W TEARING CLOTHS

    Mix your synthetics in with your cottons and put ’em on a cotton wash will usually rip stuff to bits.

    Chris.

    in reply to: AEG ARCTIS 2792-4GA(928341004) #320445
    Penguin45
    Participant

    Re: AEG ARCTIS 2792-4GA(928341004)

    I can send you a general tech document in German, or a specific F8 document in Czech…..

    Chris.

    in reply to: BEKO WMA765S No display. #320037
    Penguin45
    Participant

    Re: BEKO 765S No display.

    Assuming it’s a WMA765S, that part number is correct.
    C.

    in reply to: Whirlpool american collection not cleaning #317762
    Penguin45
    Participant

    Re: Whirlpool american collection not cleaning

    THIS STUFF is pretty amazing.

    The limitation on a hot wash with your machine is your hot water supply. A service wash on a front loader would be carried out at at least 90c; you’ll be limited to 60c at the very most.

    The other option would be to get the top off and see about having the inner drum removed to allow everything to be scrubbed clean.

    Penguin45.

    in reply to: Bosch DW detergent dispenser problem #320309
    Penguin45
    Participant

    Re: Bosch DW detergent dispenser problem

    Deadly….. Power and door outer off, bend back the lethally sharp locking tongues to release the old dispenser, bend them back down, then force the new dispenser into place.

    You will cut yourself.

    Penguin45.

    in reply to: Whirlpool ADP 970 fault #320324
    Penguin45
    Participant

    Re: Whirlpool ADP 970 fault

    When the machine faults, the start lamp will flash in a pattern, ie 1-2-3-4-pause-repeat. This is an error code. If you would post that information we should be able to advise you.

    Penguin45.

    in reply to: Can I disown an ISE customer? #320338
    Penguin45
    Participant

    Re: Can I disown an ISE customer?

    I’ll see your Mrs Baxter and raise you Mrs Marchant…….

    Chris.

    in reply to: whirlpool awz410 #320381
    Penguin45
    Participant

    Re: whirlpool awz410

    It’s a Merloni washer dryer and the fault isn’t logical, so pcb every time.

    Chris.

    in reply to: Hoover HSPF 157 #320378
    Penguin45
    Participant

    Re: Hoover HSPF 157

    Screw is just about accessible through the sump hose hole.

    Chris.

    in reply to: BEKO WMA765S No display. #320035
    Penguin45
    Participant

    Re: BEKO 765S No display.

    PCB is p/no 2822822091

    Chris.

Viewing 15 posts - 166 through 180 (of 19,678 total)