pmb

Forum Replies Created

Viewing 15 posts - 256 through 270 (of 472 total)
  • Author
    Posts
  • in reply to: AEG L63742 wm #373760
    pmb
    Participant

    Re: AEG L63742 wm

    🙂 yes it is isn’t it, nothing has been replaced on this before as it is only 18 months old. I will try replacing the wash pump and see how it goes. Thanks Martin 😀

    in reply to: Miele W827 belt #373310
    pmb
    Participant

    Re: Miele W827 belt

    Thanks Seamy after reading this i fitted the pattern belt which worked fine 😀

    in reply to: Indesit IWDE7125SUK module #371452
    pmb
    Participant

    Re: Indesit IWDE7125SUK module

    Thanks for letting me know Jim 🙂

    in reply to: Bosch SMS50E12GB/16 doing in heat pumps #369946
    pmb
    Participant

    Re: Bosch SMS50E12GB/16 doing in heat pumps

    I went back on this one today and inspected the board which looks fine. The base was full of water and operating the anti flood switch. The leak was coming from the water valve and has damaged another heat pump doh, so look out for this guys to save yourself some hassle. Its strange because i didn’t notice any water on my previous visits 😕

    in reply to: Bosch SMS50E12GB/16 doing in heat pumps #369945
    pmb
    Participant

    Re: Bosch SMS50E12GB/16 doing in heat pumps

    No i didn’t but i will, they cause this to happen? would that mean a new module? Thanks alot Martin

    in reply to: Miele T430 not drying well #369063
    pmb
    Participant

    Re: Miele T430 not drying well

    Hi Seamy thanks for getting back to me, i ran out of time so i didn’t check either of those but i will now.
    Thanks Peter

    in reply to: siemens dryer, cuts out #366920
    pmb
    Participant

    Re: siemens dryer, cuts out

    Checked board, cannot see anything.
    I dont wont to right it off, then find it was something simple,
    Anyone come across this problem

    in reply to: Hotpoint WMD947GUK dead #366813
    pmb
    Participant

    Re: Hotpoint WMD947GUK dead

    Thanks alot firestarter i have never used QER, i will give them a call 🙂

    in reply to: John Lewis Dryer #365938
    pmb
    Participant

    Re: John Lewis Dryer

    Phoned customer today and asked them to check machine as its
    a warm day but its still the same,So i will have go back, Hopefully its the Door lock.

    in reply to: cda c1930 4 way valve No #365759
    pmb
    Participant

    Re: cda c1930 4 way valve No

    Thanks Franz
    Connect dont seem to have this model listed

    in reply to: cordless screwdriver #362547
    pmb
    Participant

    Re: cordless screwdriver

    Had two Dewalt Screwdrivers, Both had the same fault,
    the trigger spring brakes.
    Gone back to Black and decker,Doe”s the job and its smaller

    in reply to: AEG L16850 dead #364208
    pmb
    Participant

    Re: AEG L16850 dead

    Thanks alot Martin i don’t think i will take that chance 🙂

    in reply to: Zanussi FC1100 nda #364122
    pmb
    Participant

    Re: Zanussi FC1100 nda

    Hi yes there is no visual damage to either the timer or module
    Thanks Peter

    in reply to: AEG dw not heating #363476
    pmb
    Participant

    Re: AEG dw not heating

    No i didn’t know how to access it, i would really appreciate the manual my email is barkerrepairs@yahoo.co.uk
    thanks alot Peter

    in reply to: AEG dw not heating #363474
    pmb
    Participant

    Re: AEG dw not heating

    Yeah its 911935677 thanks for getting back to me Colin, is it one of them? i checked the tubes for blockages

Viewing 15 posts - 256 through 270 (of 472 total)